Peugeot Forums - Peugeot Fan Club

206 Quiksilver Road Pc and Fuel Status

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 17:23 # 1
blazes06
Hello friends, the screen showing the amount I burned in km on the computer I have noticed today is exaggerated numbers per 100 km / lt. When I went to the long road, I showed that I burned 20-45 liters of instant fuel with the same gazpeda reaction on the turn, which showed between 7 and 11 liters at 5v 110 kmh, and I still did not understand what the problem was due to. Yol Pc reset I recovered, I toured a little bit, with 3 gears light gas, fixed speed showed between 19-25 lt at 60 kmh km ... My vehicle gives the same problem in the lpg lique cloth ... What do you think gives such a numerical problem ...
08.05.2020 17:23 # 2
GokhaN
It is normal to show around 20-25 lt in instant reactions
08.05.2020 17:23 # 3
blazes06
Now I measured the constant speed when going down to 60 with 3vites compressor, when I went downhill, the fuel gauge showed 0.5 lt, now it is burning down 9 liters of fuel in a 3vite compressor at 60 km downhill without pressing the gas.
08.05.2020 17:23 # 4
GokhaN
[QUOTE = blazes06] Now I measured the constant speed when going down with 60, when I went downhill with a 3vite compressor, the fuel gauge showed 0.5 liters, now it shows 9 liters of fuel at 60 km downhill at 3vit without pressing the gas in the compressor ... [/ QUOTE]

What is your fuel situation in the tank? Try to keep it above the quarter tank, it can detect under the quarter tank.
08.05.2020 17:23 # 5
blazes06
Warehouse status above half tank
08.05.2020 17:23 # 6
GokhaN
[QUOTE = blazes06] Tank status above half tank [/ QUOTE]

the maintenance of the car may have come in time. If it shows 9 lt even in the downhill compressor, there is a problem.
08.05.2020 17:23 # 7
blazes06
While my vehicle is running now, it has cataract convert error ... Why is there no catalyst in this vehicle?
08.05.2020 17:23 # 8
GokhaN
[QUOTE = blazes06] While my vehicle is running now, it gave cataract convert error ... Why did this tool not have catalyst error? [/ QUOTE]

normally there is a catalyst but the catalyst is removed or I wouldn't know if it was emptied.
08.05.2020 17:23 # 9
KenBlockJR
look at the average consumption ..
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”