Peugeot Forums - Peugeot Fan Club

206 Quik Modification

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 15:10 # 1
Guests
Hello friends. My new vehicle is 206 Quiksilver. 1.6 16V 110HP. Now I have Angel + Stop in my head. Which model would you recommend as a stop? I can also buy 16 'wheels later. There is a Sirocco (wind rose) rim on it. The rims are good but I don't like having 15. And the car is too high, I don't want to get into the bow event. I don't know what will happen.


berkaygr 2011-03-24 17:47:05
08.05.2020 15:10 # 2
Guests

I don't think you should ever change your wheels. precious rims of both your rims. If you can't find a mile, you say I'm going to be able to find it:)) & nbsp; At the moment, ten teams of 206's are already weak and costly. he buys a thin-cheeked rubber than the pain and makes the car roll. If you come to the lowering heat of both the comfort will deteriorate and you will touch the car quickly. You can wear a spring of -3.5 cm. You're gonna fall outside behind. At this point, your friends will help you in more detail ...

& nbsp;
again, your choice is ...
08.05.2020 15:10 # 3
GokhaN
I think the stops remain original. I don't think anyone has a LED stop anyway. If you say you need to wear angel, it looks like the original with chrome base.
08.05.2020 15:10 # 4
Guests
If you buy the parks from the headlamps with AUDI model LEDs, it will be number 10 ...
08.05.2020 15:10 # 5
tigerland
You can drop it with 3,5 cm bow, it doesn't look too high 206`s & nbsp;
08.05.2020 15:10 # 6
Guests
I have EIBACH 3.5 cm spring in my vehicle, neither compromise nor comfort…
It is perfectly perfect, it is beautiful in terms of standing close to the front ... as well as the wind passes under the vehicle, the brakes, for example, hold the brake, prevent it from knocking. .
Reviews
08.05.2020 15:10 # 7
Mesut
I say 5 cm, go and go :)) I don't even have any financial trouble. you will be so language :))) good luck: D & nbsp;
08.05.2020 15:10 # 8
Guests
I also think of the chrome-based angel.
& nbsp; Stop has original 206+ stops in my head. I heard it was compatible. I found it somewhere 88TL.

I think about Eibach 3,5cm in 2 months as my spring is not available now, let's see ..
< editID> berkaygr 2011-03-18 18:55:12
08.05.2020 15:10 # 9
Guests
Most likely I will get this headlight soon.

Should the bumper like 106 be lowered in 206 as well?
08.05.2020 15:10 # 10
d3Li
it is not necessary .. but if I was in your place, I wouldn't buy chrome, black suits me better.
08.05.2020 15:10 # 11
Guests
[QUOTE = d3Li] is not required .. but I wouldn't buy chrome if I was in your place black suits me better [/ QUOTE]
Front bumper is not black. I think black is very grin because it is gray.
08.05.2020 15:10 # 12
d3Li
It's a matter of taste, but chrome-based angels and leds are ugly to me ...
08.05.2020 15:10 # 13
Guests
the back of a tooth is not dropped, as far as I know ....
fell 3.5 cm fell .... .... He said no teeth.
08.05.2020 15:10 # 14
Guests
I added a photo ..
08.05.2020 15:10 # 15
oguzhan29
app on plates
08.05.2020 15:10 # 16
106_arts
I intend to use this link to have any friends who know or know
08.05.2020 15:10 # 17
Guests
[QUOTE = 106_arts] I intend to use this link to have any friends comment or know [/ QUOTE]
I talked to the owner of this while I was buying it. I think the left fender has changed. & Nbsp;

I was getting this link, then the decision has changed. There were 2 pieces of paint. He left it to 14,100.

08.05.2020 15:10 # 18
mehmetgullu
berkay good luck my brother; I hope it has been for your heart ...
08.05.2020 15:10 # 19
Guests
[QUOTE = mehmetgullu] berkay good luck my brother; it has been exactly for your heart, I hope ... [/ QUOTE]
Thank you, master. Let's try to get used to the beautiful vehicle ..
08.05.2020 15:10 # 20
d3Li
Do you have photos of the vehicle on the hand? How much did you make the spring insertion torsion setting?
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”