206 pressure pad replacement?

Could a friend tell me how another pad works, how it is understood, and the price of printing pad replacement in the 206s? did you want a lot? :)

low traction in the car, difficulty in getting up on the ramp, etc. Some masters try to get up with 2nd gear.

It is over if it stops without difficulty when you lift it in 3rd gear.

Well, is it easy in a place, my teacher or is it difficult to work?

[QUOTE = Acquisition] 3. It is over if it stops without difficulty when you lift it in gear.
[/ QUOTE] I heard that if it stops it is solid but

Originally, the price varies between 350-400 TL. Let me make a recommendation. If the difficulty is over, the speed of the vehicle increases and the speed does not increase, for example, when I was 50 km in the 3rd speed when the pressure was over, the speed exceeded 4000, and the speed of 70 km in the 3rd speed in 4000 rpm. As I said we are in the period, if the original piece is attached, it does not fall under the prices I give.

I can see that it does not work on my clock, I can not understand how many thousands of revolutions are in the engine sound, it is quite high wage, the vehicle seems to have fallen a little bit of traction, I asked him, but I do not know that it may be in psychology. Can we say something according to the speed? Turgay_66 2014-01-08 18:31:38

[QUOTE = Turgay_66] Can a friend tell me how another pad works, how it is finished, and the price of the pad pad replacement in the 206s? did you want a lot?) [/ QUOTE] kuscu38 2014-01-08 20:38:58

[QUOTE = Buyer] It is over if it stops without difficulty when you lift it in 3rd gear.
[/ QUOTE]

I know just the opposite. (While the car is not working) The vehicle is in gear on a normal incline, but without a clutch even if the vehicle is moving with the parking brake lowered.

Let me see an experience of the slope, the car will run away.

I tried today, there is no problem or it has a lifetime :) Turgay_66 2014-01-09 19:32:33

I came across a very steep slope while friends were traveling today, while I found such a slope, I said one more experience, I stopped the car, I stopped the car 1, the gear, the car started to go down gradually, is this an indication that it is finished?

[QUOTE = Turgay_66] I came across a very steep slope while friends were traveling today, while I found such a slope, I said another experience, I put the pad, I stopped the car 1 gear, this is the indicator that the car started to go down step by step? Is this an indication that it is finished? [/ QUOTE]

Pay attention to 52 seconds in the video, the speed is rising, the vehicle does not accelerate, the printing is missing the pad, you can test it as in the video.

I think if there is a sound from your guess, like a friction sound, a bouncing sound, if the grip point is too high, you can get a master ... you may have a problem on departure, but you may also need to change. Gokhan 2015-01-11 21:33:49

[QUOTE = Serkan] Watch out for 52 seconds in the video, the speed is rising, the vehicle does not accelerate, the pressure is missing the pad, you can test it as in the video. [/ QUOTE] I think my gear is downshifting, even shifting to 2, so the speed rises suddenly, because if you notice it comes up to 100 in the first gear for the first 15 seconds, then it turns into 2 again at 52 and the speed is up to 100 again. I'm sorry if I said something wrong :) Turgay_66 2014-01-17 18:50:04

It will be the opposite. If the vehicle leaves without stopping in the 3rd, 4th, etc. gears, the pressure is over. However, if it tries to lift the vehicle in the 3rd, 4th, etc. gears, it means that the pressure pad has passed this test.

[QUOTE = Acquisition] 3. It is over if it stops without difficulty when you lift it in gear.
[/ QUOTE]

The best of these gear tactics is to show the master last year, especially I looked at the printing pads last year.

My friends have 206 xr clutch up, the bidet cycle is rising, the speed is not rising, but when it is loaded slowly, it rises to the gas problem.