Peugeot Forums - Peugeot Fan Club

206 Petrol pump removal aid?

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
13.05.2020 03:19 # 1
littlenikksay
I have problems with stopping and kicking in the first run on my vehicle in gasoline, it returns to normal 1-2 minutes after working. When I use it for a while or when I throw the injector and fuel system cleaner, I do not have any problem for 2-3 months and then it does the same thing again. I suspect the petrol filter and I decided to clean it, but there is no external filter in my car. It is the type with a filter under the pump. I need to disassemble the gas pump to clean it, but I cannot disassemble the black circular piece surrounding the pump. I guess it's stuck in time
13.05.2020 17:16 # 2
sonerkyl
Gasoline filter is usually at the bottom of torsions, hodja. There are special apparatuses for disassembling the petrol pump or you will find it difficult to remove. https://urun.n11.com/servis/depo-samandira-sokme-aparati-p410678226?gclid=cjwkcajwte71brbceiwau_v9h7nevkx9fpklsunc5zyl6uojzmr06fvo2uhhkiulsrrl_ke_805eeboc5hqqavd_bwe&gclsrc=aw.ds
14.05.2020 04:54 # 3
littlenikksay
We looked at the filter repair shop, not under my vehicle
14.05.2020 10:17 # 4
ismailkaya
You have to open the wide black cap with your hand, you need to make an apparatus for yourself.
14.05.2020 22:18 # 5
talip206
It is difficult to open without apparatus. Even if it is opened, it does not close properly and may leak. Or if you force him to open it, you will break the plastic elbows and everything will be ruined.
15.05.2020 04:03 # 6
littlenikksay
It is best to find the apparatus then littlenikksay2020-05-15 04:03:47
29.12.2022 17:01 # 7
Arora66
Selamunaleyküm did I solve the king problem?
29.12.2022 17:57 # 8
ACUN3866
Selamunaleyküm did I solve the king problem?
30.12.2022 07:53 # 9
Berkay Erdinc
The fuel filter is under the vehicle. If you can't find it, it is not in the tank. It may have been canceled before or something else may have happened to it. For this malfunction, you should measure the pressure of the pump, there is a possibility that it can be done from the pump.
A special apparatus is required to remove the cover. Since most of them are not in the workshop, they are removed with the help of a screwdriver and hammer. >
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”