206 moves

friends I wanted to share some information with you.

I wish you changed the thermostat along with the timing.

If the thermostat was to be replaced by a difficult place. or simple place.

Depending on the timing belt, it usually changes with the timing. My master had bought 100 lira for his replacement.

When changing the thermostat, put it on the computer, open the vehicle at 90, it sets the fan sender, I think 110 more. I know that peugeots open at 100.

the problem may be from the brain. the brain fan cannot send the command that will turn on in the first stage. A master who understands electronics well will notice this. because you have changed other parts that make the fan work.

Whether the indicator shows much, as I do :) I connected it to the computer and checked the instantaneous temperature from your computer and indicator. I was showing 110 too, but in reality 100 customers were showing more than 10

no problem or it should be over 90 overheated, since there is a standard compressed engine in 206, there is not much space to breathe or the room is heating the thermostat, nothing to wonder.

When I first bought my car 206, the fan would open around 11o but it didn't boil. I took the fan sender and put it on my result indicator, there is no hard problem in 93 :)

Because I was confused, I found the person who made this device specifically and got it done :)

Brother, as I said, your problem is not sending the command to operate a brain fan from ecu, that is, from the brain.

Hello brother, can you give me information about who you made this tool and how much it cost?

I already made a button in it. I am looking at it. Pressing the button.

so what should I do to fix the brain problem

There is no rule that the ECU is absolutely flat. ECU is signaling but there is a problem with the role maybe it needs to be examined

I did not change the fan roles, it was the last fan roles. I look at the cable I pressed the button inside and I turn on the fan.

If you read the topic, you will see that koray has changed all the other parts. I think there is only one ecu left unchecked, the problem is either in cables from ecu to fan or directly in ecu. Brother I got it repaired, I was bored, but if that button works, I think there is no need to find an alternative solution.

[QUOTE = evilss] brother hello can you give me information about who made this device? [/ QUOTE]

280 TL device makes a software developer in Izmir, does not have mass production and sales, but if it wants, it produces and sends it by cargo.

the problem does not open in the first level, this problem does not open in 2 levels if it is in the cable, I think the problem in the brain is thermostat. But I am changing the cables, let's look at the brain accordingly.