206 Lighter does not work

Friends greetings. What I did in my car, I did not operate the lighter. I went to an electrician, checked the insurance, there was no problem. Then I showed it to someone on ikitelli. If there is a friend who understands, let me bring it in Istanbul, which says I will do it from here. My hand is not prone to this kind of work. I don't want to deal with the services. I'm a student, I don't want to give money to the little things.

If you said that there is no problem in the fuse, for your information, the lighting will not work if the cigarette lighter, torpedo light and vehicle interior lighting do not work from the fuse connected to the same fuse.

I guess there is no problem in the torpedo in the light.

My friend, I think the malfunction is probably in the lighter socket. There will be a thermal switch set at 125 degrees Celsius on the cigarette lighter socket for high temperature protection. This part is malfunctioning.

brother, my hand is not apt. If it needs to change in the nest, how long do I change it? If your hand is prone, I'll take it to you if you are in Istanbul :)

it was broken in my old car too. there was no problem in insurance. I did not dwell on what is the reason how to handle it :)

In my own car, I changed the part I mentioned in the socket myself. Part electronic electronics is around 1.5 -2 TL but you need to find an electrician to deal with. Unfortunately, I am not in Istanbul.

thank you if i can find tomorrow i will ask an electrician

Hello, I had the same problem with the lighter socket twice, but as it is said, the fuse is not the same as the torpedo light. I don't remember the exact location of the insurance. So I recommend you to go to a better electrician. You can solve the problem by changing your insurance.

The control fuses of simple controls (internal lighting-cassette-tape etc.) are in the BSi box under the steering wheel. I need to check all the fuses here. After making sure of these, check the fuses in the engine fuse box.

Normally the problem is divided into 3 ways.

Either he came to the facility
either the cigar lighter socket is broken (oxidation or caking accumulation may occur if you are using it)
Or there is a problem with the tool you attach to the cakmak.

I will go to a solid electrician after the feast.

Hi ,