![]() ![]() |
|
![]() |
206 led stop problem |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 |
08.05.2020 17:32 | # 1 |
![]() |
|
|
08.05.2020 17:32 | # 2 |
![]() |
|
there may be non-contact, change the warranty if there is any. Otherwise, if it is completely broken, I say use it, if it is going to be opened, I will open it when it is completely broken. |
08.05.2020 17:32 | # 3 |
![]() |
|
buddy solution is electronic circuit but they can't open it
|
08.05.2020 17:32 | # 4 |
![]() |
|
This problem always happens in leds .. my brother's car first and then my car has the same problem .. there are people who can do very difficult to repair .. but if there is a circuit that can be opened, of course, the circuits are hard to repair because of the molds, & nbsp; I removed the led stops and put them on afterwards.
|
08.05.2020 17:32 | # 5 |
![]() |
|
If you have recently bought the circuits mentioned in most of the power friends to open it at most stops, replace it or try to repair it if it is possible, but for someone who does not understand this reason, this is even more power personally, I have more or less electronic information, I have not dealt with it, though I would not have been close to it. . Member
|
08.05.2020 17:32 | # 6 |
![]() |
|
it seems that there is money in this business, I can do it, bring faulty led stops. > ![]() ![]() |
08.05.2020 17:32 | # 7 |
![]() |
|
[QUOTE = ibrahim.kut] dude the solution is in electronic circuit but they can't open it, I made circuit by myself [/ QUOTE] my sister is prone to hand If I couldn't, I would describe it to the electrician, how did you do it?
|
08.05.2020 17:32 | # 8 |
![]() |
|
I installed it, dude, I used a 7805 integrated so that the relay is turned down at 12 volts. I use it as a monster.
|
08.05.2020 17:32 | # 9 |
![]() |
|
I installed the circuit, dude, I used a 7805 integrated so that the relay is turned down at 12 volts. I am using it as a monster, I am very pleased. Sometimes it burns sometimes it doesn't burn. Just because a friend did it like this. Can you do it as soon as I say you have done with this 12 volt role and integrated or can you write it to me in a way that it will understand.
|
08.05.2020 17:32 | # 10 |
![]() |
|
Trust me, I will send it to me. What more can I say makes a good electronicsman but I still don't know?
|
08.05.2020 17:32 | # 11 |
![]() |
|
|
08.05.2020 17:32 | # 12 |
![]() |
|
Trust me, I will send it to me. What more can I say makes a good electronicsman but I still don't know? brother, I am 10 days without stop, where do I go :) Thanks anyway.
|