206 Installing the Speaker to the Luggage Sphere.

Speaker Mounting to Luggage Pandenot. First of all, let's put the original sponge on the mdf mold and draw the outline of the sponge. Next, let's draw the guide cartons that come out of the Speaker box and the rings where we will place the speakers. After adjusting the support heights as in the picture, after the cutting process is finished, let's apply the half kg of derby adhesive to the top and edge of the chipboard. Let's stick the 3 mm thin sponge to the top and edge of the whole sponge. At this point, especially if the edges are very important, the covering skin may tear. Later, let's punch the leather that we spread on the upper part of the sponge, to the lower sides and staple it from the lower edges. To get the ugliness of the punch image, let's stick a die of leather from the bottom to the pendulum. We can cut the leather and sponge at the points coming into the speaker holes with a utility knife. With the mounting of the speakers, the ugly image left at the edges of the ring will also be closed. PIN Name A1 Signal Mute (input) A2 VAN Data (input / output) A3 VAN DataB (input / output) A4 + VAN (input) A5 + 12 V Commuté (output) A6 + Eclairage (input) A7 + Permanent (power supply input) A8 GND (power supply) PIN Name B1 + RR loud-speaker B2 - RR loud-speaker B3 + FR loud-speaker B4 - FR loud-speaker B5 + FL loud-speaker B6 - FL loud-speaker B7 + RL loud -speaker B8 - RL loud-speaker PIN Option RB3 RD3 C1 Remote control Input 1 ncnc C2 Remote control Input 2 ncnc C3 Remote control Ground ncnc C4 Remote control + ligting output ncnc C5 Remote control Ground ligting ncnc C6 ncnc C7 nc Voice synthesis + left Line in C8 nc Voice synthesis - left Line in C9 nc Voice synthesis + right Line in C10 nc Voice synthesis - right Line in C11 nc Aux (tel) + Line in C12 nc Aux (tel) - Line in C13 CD Changer Van Data / pin A2 CD Changer Van Data / pin A2 C14 CD Changer Van DataB / pin A3 CD Changer Van DataB / pin A3 C15 CD Changer Bus GND CD Changer Bus GND C16 CD Changer + Permanent (output) CD Ch anger + Permanent (output) C17 CD Changer + VAN (output) / pin A4 CD Changer + VAN (output) / pin A4 C18 CD Changer Audio GND CD Changer Audio GND C19 CD Changer Left Audio input CD Changer Left Audio input C20 CD Changer Right Audio input CD Changer Right Audio inputhasimayaz2009-07-22 16:40:11

dude you are super Thank you.

You said a sponge or something. See my lack of information exposed.
Where can we find these materials?
master 2009-07-22 17:12:03

Good health, Haşim teacher.

I share good health, but I do not like to destroy the original part. Instead, I make a mdf in the same dimensions and pierce it, put my columns on it. I think it is more beautiful :)

friends original luggage & nbsp; anyone who knows that the lid pandezot is 600 rubles, hopefully think again when cutting it. :))

It is nice

[QUOTE = apopeugeot] friends original luggage & nbsp; anyone who knows that the lid pandezot is 600 rubles, hopefully think again when cutting it. :)) [/ QUOTE]

The price of the sponge above is correct.

If the electrical part of this 206 throws a very complicated fuse, the car is passing by, friends, beware :)