Peugeot Forums - Peugeot Fan Club

206 Information Screen Fading

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 17:19 # 1
faldov
Hello friends, I just joined you.2006 Peugeot 206 I have a fever model. I have seen the problem of not reading the numbers and articles for 1 week on the information screen. Of course, I do not want to give this much money to a screen. Obviously I hope to find a 3-line 206 screen. / div>

Thank you .




betanor 2013-01-27 13:23:41
08.05.2020 17:19 # 2
Serkan
First of all welcome, no one knows who makes the screen repair work difficult, the 3-line display is sold between 150-160 TL, you don't need to change the com2000 unit for the 3-line display, it works directly when plugged in. The com2000 unit is required to see the trip computer data and you don't need to buy it. You can have a com200 which is a trip computer by making a small operation. Details are available at the link below.

http://forum.peugeotturkey.com/forum_posts.asp?tıd=16691&title=peugeot-206-yol-bilgisayar-com2000-tu-yapm Reviews
08.05.2020 17:19 # 3
serkan719
I'll have a question, tell me. div> after them. Can I see how close I am at 100 km or how many kilometers I can go with the warehouse.

Note: My vehicle is Van HDI
08.05.2020 17:19 # 4
Serkan
You see, my teacher, you may have to connect it to the computer in the very small possibility and activate the on-board computer, most people worked without activating it, including me.
08.05.2020 17:19 # 5
serkan719
then thank you very much. & nbsp;

let's come to the scrap dealers sometime. & nbsp;
08.05.2020 17:19 # 6
Alicilik
[QUOTE = serkan719] thank you very much at that time. & Nbsp;

let me come to the junkyards sometime. It is also sold on the Internet, but we got it good.
08.05.2020 17:19 # 7
serkan719
I have myself in the industry, probably somewhere. & nbsp;

no rush but it looks good.

body - paint etc. In bits.
08.05.2020 17:19 # 8
faldov
& Nbsp; I have been using my first car, the 206 Fever, which is a good friend of serco. & nbsp; Only for 1 week the information screen is gone and my com2000 key press is going down as active pressing. The screen does not appear.If the screens take about 150 screens and the software is installed, the problem will be solved? > & nbsp; thanks for helping.

wiper arm


Signal lever

Reviews
Reviews
Reviews
Reviews
Reviews



betanor 2013-01-27 13 : 24: 48
08.05.2020 17:19 # 9
Ozgur
auto mark at the end of the wiper arm for rain sensor. There is no rain sensor only. I think the owner before you has changed the wiper arm.It activated the trip computer but probably disassembled and sold the 3-line display. & nbsp; "Smile"
you will see the information when you install 3 lines without installing software. So just take 3 lines, the event will be over ...
08.05.2020 17:19 # 10
faldov
Thank you I guessed that it was a free rain sensor. You say you sold the 3-line screen. I mean, the man I bought will not make a lawyer, but mankind. Maybe the 3-line screen broke down. series, I think, from Peugeot's wrong practices. Can we learn the model from anywhere in the car? betanor 2013-01-27 13:51:55
08.05.2020 17:19 # 11
Ozgur
what does it say on the license
08.05.2020 17:19 # 12
faldov
[QUOTE = Free] what does it say on the license? [/ QUOTE]
& nbsp; 206 1.4 hdi fever
08.05.2020 17:19 # 13
Guests
[QUOTE = betanor] Hello friends, I just joined you.2006 Peugeot 206 fever has a car.In the information screen, there was a problem of reading and reading the numbers and articles for 1 week.
Of course, I don't want to pay so much money for a single line screen. I honestly hope to find a 3-line 206 screen. Where can I find in Istanbul. is it possible?

Thank you .




[/ QUOTE]
my friends gave the necessary information enough to me, in addition, I bought a 3-line display, the original single line that came out of the vehicle I said I would give up the screen in mind that you would give up the other system available.
& nbsp;
08.05.2020 17:19 # 14
faldov
[QUOTE = Birtan ÇÖTELİ] [QUOTE = betanor] Hello friends, I just joined you.2006 Peugeot 206 fever model car. He said about -300 TL.
Of course I don't want to give this much money to a single screen. Or is my information screen possible to repair this way?

Thanks .



< / div>

[/ QUOTE]
my friends gave the necessary information enough, I also bought a 3-line display, I said I would give up the mind of the original one-line display of the current system that would give up the other system.
& nbsp;
[/ QUOTE]
Thanks for the information, I'll meet with the electric master tomorrow, I will decide what to buy.
08.05.2020 17:19 # 15
ertkrdvt
the same problem exists in me, I am all alone when I see the lights, I have to change now its

08.05.2020 17:19 # 16
ertkrdvt
The lights are not visible at all, the gunduzz is certain and there is no night.

08.05.2020 17:19 # 17
Serkan
[QUOTE = ertkrdvt] lights are not visible at all, gunduzz is obvious, there is no night at night. If it is not lit, its bulbs have exploded, remove the cap at the top of the screen, there are 3 bulbs behind it, it will be clear anyway
08.05.2020 17:19 # 18
ertkrdvt
The volume of the screen is not lit, it becomes evident when the sun hits during the day and there is nothing at night.
08.05.2020 17:19 # 19
Serkan
Then the bulbs break out, unscrew the screen, there are 3 sockets behind it, take it from bottomless indicator bulbs and plug it in. If you examine it a little, it is very simple to disassemble and install it
08.05.2020 17:19 # 20
ertkrdvt
Exactly, teacher bulbs burst & nbsp;
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”