206 Indoor Lighting

Hello, I want to make interior lighting for my 206 vehicles. Everything is ready but there is a situation like this. I'm going to put the Superflux blue leds at a right angle to the right and left feet under the back. I prepared white in 3 of them and I will find a nice place for them. But I have a question What are the cables that turn on the ceiling lighting when the doors are opened? 2 cable harnesses were going with the kadary that I remembered from the middle poles towards the front. Which of them should I connect there, can you help? If I can, I will photograph and throw. They will have a little help to those who will, or have prejudices about how it looks ...

update

My brother, let me drop those cables :) You do your best method, pull down the plus plus cables from the lamp, through the ceiling trims, the cables are down, the most beautiful method is that you cut the wrong cables to the press.

How do I get her through the ceiling ????

Do not the door switch is coming out?

I'll see it soon, but the door switch only comes with + pole. - We're going to take another cable.

[QUOTE = EmRe26] I will see soon, but the door switch only comes with + pole. - We will get another cable from now. [/ QUOTE]

- Can't you connect to the chassis instead of pulling the cable? So directly to the body?
Koliva 2011-03-12 09:35:39

[QUOTE = EmRe26] brother how do I get it through the ceiling ???? [/ QUOTE] my brother the edge of the ceiling hurts, there is a cable to pass, if you try it easily, you see the doors and stuff, take it from the ceiling, take it lightly on the side of the ceiling :)

okay, brother, I looked at this day, I set up the plan tomorrow. I throw the pictures ..

I pulled the installation from the ceiling and brought it up to the pole of the right rear door. xD but the cable was not enough, or rather I didn't want to make a piece pinch. Tomorrow I will buy enough cables and distribute them in places suitable for the front and back seat altar. I attached a white strip led to the front. Let me get the blue back, do you think white? I made the ceiling lamp white with LED. I am waiting for your suggestions. I will throw wholesale pictures when the work is done.

blue is good my brother :) if you have the opportunity, make it more stylish in front of me, if i have the opportunity, i will pull the blue one :)

my interior lighting is okay. When I thought a little last night, I wanted to make all white, not blue, so that the order would not deteriorate. I pulled from the ceiling to the right middle pillar, the lighting was not lit in the trunk, I entered the lighting from the side, added a supplement, canceled the bulb there, and put on my own superflux. I continued the installation from the right, passing through the trunk, from the left, I took the supplement of the back side in the middle pole and dewamed the front side. I came to the driver's compartment and attached the led strip over the pedals to the fuse box and completed the installation. Age 18 steps is what I can do :) I could not take photos during the construction phase. I had limited time. I did not want to deal with it. Ennn I will clean my car and add pictures :). respects..

good bye, brother :)

I took beautiful pictures of the foot lights. But I forgot to shoot the ceiling light and the luggage light, so I put it in the back. Let's see how you like these. Waiting for your comments ... emre26 2011-03-16 20:10:51

[QUOTE = EmRe26] I took beautiful pictures with foot lights. But I forgot to shoot the ceiling light and the luggage light, so I put it in the back. Let's see how you like these. Waiting for your comments ... [/ QUOTE]

No, I did it myself with LED