|
|
|
|
206 indicator problems |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 21:18 | # 1 |
 Bayrambugra |
|
|
|
|
| 08.05.2020 21:18 | # 2 |
 umydn |
|
|
[QUOTE = Bayrambugra] In my 2004 model 206, two months ago, I had a starter problem due to the battery. But the speed of the car started to work at low speed. I realized later that the indicator dial went down, not at low speed. While the tachometer dial should be at 0 when the car is not running, how can I correct the wrong show as it is about 1.5 -2 cm below? [/ QUOTE] remove the instrument panel and lift it up a little by hand. This process is as simple as I said, but if you do not know or can not do it, make it to someone else. you can break the engine. When doing this operation, the ignition of the vehicle is off.
|
|
| 08.05.2020 21:18 | # 3 |
| Bayrambugra |
|
|
Thank you I fixed it
|
|
| 08.05.2020 21:18 | # 4 |
| umydn |
|
|
[QUOTE = Bayrambugra] Thank you I fixed it [/ QUOTE] You're welcome. I'm glad to correct you.
|
|
| 08.05.2020 21:18 | # 5 |
 tungajo |
|
|
Good day my friend, I wonder how you fixed it, can you tell me You did the hand, as your friend said, or did you remove the rear plastic gears on the display and did it. And is it still working?
|
|
| 08.05.2020 21:18 | # 6 |
| Bayrambugra |
|
|
Sorry it's late, brother. I can't log in here often. I removed the indicator glass or something, I used to turn a hand and fix it to 0, it finds its place. He stayed there. I did not open the back of the indicator or something, I did not see any engine. I made the needle by moving it in my hand, it worked fine now
|
|