206 How to replace the fan relay? |
|
• Homepage » PEUGEOT MODIFIED PLATFORM » 206 |
08.05.2020 17:51 | # 1 |
candanxyz | |
Thank you very much if those who know help.
|
08.05.2020 17:51 | # 2 |
candanxyz | |
Does anyone know?
|
08.05.2020 17:51 | # 3 |
error | |
There are a few pictures below that show the location and disassembly of the "1 numbered" location at the end of a fan relay wiring harness. Be careful with the insulation while working. Use two layers of macaron. |
08.05.2020 17:51 | # 4 |
candanxyz | |
Thank you very much, I can easily change the photos that show well.
|
08.05.2020 17:51 | # 5 |
memet | |
What and where can the cable colors of the master number 6 socket be connected? |
08.05.2020 17:51 | # 6 |
elestern | |
When the topic is opened from the fan, let me ask one thing. Do we continue to work after our fan stops like the renoes. I did not come across yet.
|
08.05.2020 17:51 | # 7 |
madblueblacksea | |
[QUOTE = elestern] When the topic is opened from the fan, let me ask one of us. Does our fan stop working after the ones like renoes? The fan stops when the mansion is closed. No need to work, because the aluminum block is already on, the motor continues to cool by itself |
08.05.2020 17:51 | # 8 |
candanxyz | |
Let me tell you why I have changed the fan relay while the subject is holed. When the vehicle was going, the temperature indicator was based on the bottom, the temperature rose, I thought I opened the hood, everything seemed normal. and no longer doing the relay work and we changed it. 10 tl
|
08.05.2020 17:51 | # 9 |
mertdemiray | |
As my fan is not working at the 1st stage, friends are hurting at 105 and turns to full speed. I suspect from the resistor. I wonder what is the location and the above cable sockets? Could you help? Which of the fan relays is in circuit 1 if not from the resistor?
|
08.05.2020 17:51 | # 10 |
Ssedo | |
In me, the rating goes down to 0 or exceeds 100. I changed the heat sensor, would it improve if I change the fan sensor, friends or what might be related to you?
|
08.05.2020 17:51 | # 11 |
candanxyz | |
replace fan relay, inexpensive part already
|
08.05.2020 17:51 | # 12 |
koray | |
friends, the top part is the first circuit and the first one is the fan relay.
|
08.05.2020 17:51 | # 13 |
sonerkyl | |
the subject is a bit of a ghoul fan relay attached sım as I said koray, the top team undercarriage 1 circuit
|
08.05.2020 17:51 | # 14 |
tamer166 | |
Master Could you write the Joints of the Sockets you are numbered, ie where to connect and what they do? Finally after the Fan connections are completed, Where is the last Cable connecting? |
08.05.2020 17:51 | # 15 |
koray | |
SUPERVISION SUBTITLE 1 CIRCUIT. WE WERE NOT ANSWER RESPECTS
|
08.05.2020 17:51 | # 16 |
staticxxx | |
It was a little late reply, but I'll tell you. For the top fan, the relay of the bottom air conditioner. my machine is 2000model I have a piece they call fan 1st stage and 2nd stage bitron brain. he decides. doing relay on relay. Changed system after 2003 model. The task of the bitron brain has been added to the car's own brain. he also has two relays. the same fan on the top, for the air conditioner on the bottom. My teacher already has a 10TL piece. Replace the head in both hands when you touch it. the fan resistance is a very dipped piece, very prone to distortion. change it too. use head comfortably
|
08.05.2020 17:51 | # 17 |
ALLEX | |
The subject is current.
|
08.05.2020 17:51 | # 18 |
kaan206 | |
[QUOTE = staticxxx] was a little late reply but I'll tell you. For the top fan, the relay of the bottom air conditioner. my machine is 2000model I have a piece they call fan 1st stage and 2nd stage bitron brain. he decides. doing relay on relay. Changed system after 2003 model. The task of the bitron brain has been added to the car's own brain. he also has two relays. the same fan on the top, for the air conditioner on the bottom. My teacher already has a 10TL piece. Replace the head in both hands when you touch it. the fan resistance is a very dipped piece, very prone to distortion. change it too. use head comfortably [/ QUOTE] Hi, the first stage fan does not open on the vehicle, only the 2nd stage is active. Roleler may be a new problem
|
08.05.2020 17:51 | # 19 |
kaan206 | |
[QUOTE = sonerkyl] the subject is a bit of a ghoul with the fan relay installed on the sım, as the kora says the top undercarriage 1 circuit [/ QUOTE] This may cause 1st stage not working
|
08.05.2020 17:51 | # 20 |
M.Ahmet059 | |
When the pictures are gone, the ready topic is hosed, let me ask a question, my 206 1.4 2000 model petrol lpg, the 2nd level of the fan is not opening, is there a problem with the relay? Or is there any problem idea?
|