206 How to remove the door slats?

I want to remove the door laths, I will cover with foil.

After removing the door face, there are clips that hold it from the inside and you can remove them by removing them.

It comes out when it pulls the laths by one side.

When he pulls it towards himself, he should normally come out of the clips, but all the clips are broken, so be informed. You can easily find brocade or tofaş clips in the most suitable clips for our clips.

There are clips holding the slats (such as a curtain holder), if you want to remove the door without any operation, you should pull it out on the horizontal axis by applying pressure with your hand without pulling it directly. If the female is crushed in place of the old clips after covering, you can easily insert the new one, and when it is directly aligned and seated, `` pit pit pit '' sits with one or two strokes. (You have to put the lath on the lath as the traveler, which I call the clip, and then align the lath with the laps in the car.) ninjitsu07 2013-11-23 19:45:37

:)) In my technique, the clips are not broken, but troublesome ...

ewet be sure to have a spare clip next to it, I explained with the pictures last year, I couldn't find it in the form

this maybe helps