206 HOUR-DATE INDICATOR PROBLEM

Friends 2002 model 206 xs does not light up the clock display on the chest of my car. When I press it with my hand or press it to the screen, it burns out, it goes out again, is there any contactlessness you understand or is there any other malfunction?
If anyone knows about it, please help, how much will it cost if I have it repaired?

What time is this 3 lines road information display ??

Yes my brother

If you want to see if there is contact or looseness,

Do you need a tool like a screwdriver for this
Can I take it off directly if I force it

Pull out the cap on it, if you need to take it off the screen, the screws will appear when you remove the cap.

thank you I will try and I hope I will do it without any harm.
When I detect the problem, I will share it again.
lazaruss 2013-07-26 17:25:22

It was not burning in me, but not contactlessness like yours, the lights exploded myself, I disassembled it with 20 tors. It has 3 bottomless bulbs. I changed 50 krş fala. It is a very easy problem.

Exactly I think I have contactlessness. Every once in a while it goes out, I want to take it off and look at it, now if I take it to the industry, they will get world workmanship.

I had the same problem. The lamps were sometimes flashing and sometimes flashing. I removed the indicator. There are two pins that supply the indicator lights. the pins enter the socket on the card. I had one end of this socket removed. I soldered the pins directly on the card via cable. Disassemble the front panel and shine a flashlight behind it. The problem is the same if you see something faint in the display.

friends problem solved. there was contactless :) I pushed the top panel by taking care not to damage it with my hand and it was very simple. Then I took the first cable out with my hand and nothing happened. then I removed the screen. When I disassembled the screen, I encountered a pile of wires. If they were merging in a socket, I saw the light blinking with my hand. there was a lack of contact in the socket, there was very little gap between the socket and its socket, because it played a socket in that gap, it was making contact. In a very simple process, I first squeezed a piece of thick paper into the space, and then I squeezed some silicone with a silicone gun on it and it was like a bomb. neither relaxation nor contactless nothing remains. And when I opened the ready panel, I renewed the bulbs :) 0,75 krş * 4 = 3 TL