![]() ![]() |
|
![]() |
206+ Help |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206+ |
08.05.2020 17:55 | # 1 |
![]() |
|
Where can I find spoilers? I want to print the front side. |
08.05.2020 17:55 | # 2 |
![]() |
|
[QUOTE = TroubLe59] We have friends 206+. I will get the woofer and amplifier in the car now. Can I attach it to the original tape? Can be attached to the original tape. With the help of it, you can convert it to lowend. in this case, you will not use a converter. If there is no such option, you will need to use a converter. (because if I don't like painting, I need to restore it) will you darken the outer glass or the inner chrome of the headlight? The inner foil is difficult but you can use transparent foil on the outer glass. Where can I find the spoiler? On the Internet it is sold but I prefer to see it personally. I can help in Ankara. I want to print the front side. Coilover is just the detail for you to cut or compress is a very inconvenient best 5cm bow. [/ QUOTE] With red I have mentioned all the points in your mind, if you have something else you can ask without hesitation. |
08.05.2020 17:55 | # 3 |
![]() |
|
[QUOTE = Buyer] [QUOTE = TroubLe59] Friends we have 206+. Now I will get the woofer and amp in the car. Although it is not completely sure that it can be attached to the original tape, you can convert the original tape's output tomorrow to lowend with the help of pp2000. in this case, you will not use a converter. if there is no such option, you will need to use a converter Would it be with the film in the dimming? (because if I don't like painting, I need to revert it) Will you darken the outer glass or the inner chrome of the headlight? The inner foil is difficult but you can use transparent foil on the outer glass. Where can I find spoilers? It is sold on the Internet, but I personally prefer it to be taken by seeing. I can help in Ankara. I want to print the front side. I recommend using a 5cm einbach spring. Coilover is just the detail for you to cut or compress is very inconvenient, the best is the 5cm spring. [/ QUOTE] You can ask all the points in red, without hesitation, if you have something else on your mind. [/ QUOTE] ![]() |
08.05.2020 17:55 | # 4 |
![]() |
|
[QUOTE = Recipient] [QUOTE = TroubLe59] Friends we have 206+. I will get the woofer and amp in the car now. Can I attach it to the original tape? You can convert the output tomorrow to lowend with the help of pp2000. in this case, you will not use a converter. If there is no such option, you will need to use a converter. Would it be with the film in the dimming? (because if I don't like painting, I need to restore it) Will you darken the outer glass or the inner chrome of the headlight? Inner foil is difficult but you can use transparent foil on outer glass Where can I find spoilers? I prefer. I can help in Ankara. I want to print the front side. Coilover is just the detail, for you to cut or compress is very inconvenient, the best is the 5cm bow. [/ QUOTE] We will use transparent foil for headlights. I will take care of the sound system. I will buy a componet and subwoofer. how much? |
08.05.2020 17:55 | # 5 |
![]() |
|
[QUOTE = Buyer] [QUOTE = TroubLe59] Friends we have 206+. Now I will get the woofer and amp in the car. Although it is not completely sure that it can be attached to the original tape, you can convert the original tape's output tomorrow to lowend with the help of pp2000. in this case, you will not use a converter. if there is no such option, you will need to use a converter Would it be with the film in the dimming? (because if I don't like painting, I need to revert it) Will you darken the outer glass or the inner chrome of the headlight? The inner foil is difficult but you can use transparent foil on the outer glass. Where can I find spoilers? It is sold on the Internet, but I personally prefer it to be taken by seeing. I can help in Ankara. I want to print the front side. I recommend using a 5cm einbach spring. Coilover is just the detail for you to cut or compress is very inconvenient, the best is the 5cm spring. [/ QUOTE] You can ask all the points in red, without hesitation, if you have something else on your mind. [/ QUOTE] What is the name of the controlled shock absorber, whatever its prices are now just forwards |
08.05.2020 17:55 | # 6 |
![]() |
|
Spoiler is a must, hodja. Without spoilers, the 206s seem to be naked. I think they do scholarships with remote control shock absorbers, or I do not remember Kocaeli.
|
08.05.2020 17:55 | # 7 |
![]() |
|
[QUOTE = Buyer] Spoiler is a must, hodja. Without spoilers, the 206s seem to be naked. I think they do scholarships with remote control shock absorbers, or I do not remember Kocaeli. [/ QUOTE] I will take spoiler but my car is already in the new 206 + s flat + in the front fender |
08.05.2020 17:55 | # 8 |
![]() |
|
[QUOTE = TroubLe59] [QUOTE = Recipient] Spoiler is a must hodja. Without spoilers, the 206s seem to be naked. I think they do scholarships with remote control shock absorbers, or I do not remember Kocaeli. [/ QUOTE] I will take spoiler but my car is already in the new 206 + s flat + in the front fender [/ QUOTE] If you are not going to press, why are you intervening in the front? |
08.05.2020 17:55 | # 9 |
![]() |
|
[QUOTE = Buyer] [QUOTE = TroubLe59] [QUOTE = Buyer] Spoiler is a must-have, hodja. Without spoilers, the 206s seem to be naked. I think they do scholarships with remote control shock absorbers, or I do not remember Kocaeli. [/ QUOTE] I will take spoiler but my car is already in the new 206 + s flat + in the front fender [/ QUOTE] If you are not going to press, why are you intervening in the front? [/ QUOTE] I mean, I gave up, I don't press it |
08.05.2020 17:55 | # 10 |
![]() |
|
Ali! You have shared your information in a detailed way to your keyboard, from hand to arm. I even thanked me to read the subject. ![]() |
08.05.2020 17:55 | # 11 |
![]() |
|
[QUOTE = Buğra] Ali! You have shared your information in a detailed way to your keyboard, from hand to arm. I even thanked me to read the subject. ![]() You're welcome, brother, what do we mean? ![]() |
08.05.2020 17:55 | # 12 |
![]() |
|
[QUOTE = groundcover] [QUOTE = Buğra] Ali! You have shared your information in a detailed way to your keyboard, from hand to arm. I even thanked me to read the subject. ![]() You're welcome, brother, what do we mean? ![]() [/ QUOTE] What kind of modified appearance engine you can think of? |
08.05.2020 17:55 | # 13 |
![]() |
|
[QUOTE = trouble59] [QUOTE = groundcover] [QUOTE = Buğra] Ali! You have shared your information in a detailed way to your keyboard, from hand to arm. I even thanked me to read the subject. ![]() You're welcome, brother, what do we mean? ![]() [/ QUOTE] What kind of modified appearance engine you can think of? [/ QUOTE] I wrote wrong: D What else do you think can be done? without engine |
08.05.2020 17:55 | # 14 |
![]() |
|
You can edit or delete your message from the message options. |