206 heating pads

Hello, there is a little water leak at the point that connects the heater core to the hose.
I have examined the issues that have been opened in the forum, and we have brothers doing this job without putting the feeling. The problem has been solved with the change of orientation.
I do not have the full knowledge of the Oring sizes and how to remove the honeycomb in the vehicle.
I am waiting for your valuable help.

To remove the center combs, you can remove the screen cap by removing it with a flat screwdriver and remove the two screws at the top. Other honeycombs also come out of their edges with a flat screwdriver.

Sir, there is no problem in the ventilation ducts. The place where I am talking about is the radiator core on the right side of the gas pedal.

Now I understand, sir. The master had lowered the front chest and replaced it with a new one, since there was a leak in my radiator. Do you have such a problem?

The heating radiator is solid. There is a leg in the connection part. How can I do it without inserting a goggle and I am in the research and I am waiting for help in order to have the oringin gauge that I am going to change.

Friends with more detailed information will help, teacher.

I had the same problem, but today it was on the run. I was thinking about doing it without removing the chest. I asked the piece for an oring according to the orings on the original pipe, but it was absent. You can ask him to measure and give that pipe or honeycomb to a particle who sells it. There is both new honeycomb and pipe from that oring. Or you can buy the pipe for 50 TL, as a last resort. What I want to do is first remove the pipes inside the hood, then remove the screw that fixes the pipe from the inside. To remove the screw connecting the last honeycomb and push the pipe back to save it from the honeycomb. As in the 307s, the honeycomb does not seem to be completely out of place, but 5cm or so. Take a chance if you want. Have not looked, connect the pipes in the hood and start the electricians tour. May it be easy. If you inform the result, it will help the friends. madblueblackse to 2016-09-25 16:47:36

The same was seen on my head, you have the opportunity to change the radiator without removing the chest, I opened a photographic subject about it, even in the forum, but first there are drugs that prevent radiator leak, if it does not give results, I will discard the subject and change it by looking at the pictures. I bought würth brand radiator leak preventive medicine

Dear monalos, if you don't bother, can you share the link of the subject?

Can I find out how you made sure the radiator is intact?

I also changed the radiator radiator, I said it was solid, I was saying it was missing from the orings when the master said it was broken.

The part that is running off the water is at the connection point, so I think it is intact.
If you are confident about the oring part, some masters may have told you that because they get extra money or break and break it while removing the piece.

I have read the subject and the comments, I have changed the honeycomb in an event that happened to me, something like this is not possible to do without removing the chest, but I did not have it removed, but it is not possible to remove it without removing anything because the check is not in a ready place. If there is nothing to try, you will not lose anything, honeycomb may ask for change.

I sent the link monalos 2016-09-26 07:54:46

I forum.peugeotturkey.com/forum_posts.asp?tıd=38402&title=206-kalorifer-sokumu-resimlicozul monalos 2016-09-26 07:57:43