|
|
|
|
206 headlight replacement |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 14:13 | # 1 |
 cankurts |
|
|
|
|
| 08.05.2020 14:13 | # 2 |
 FTH |
|
|
As far as I know it is happening until 1998 - 2002 ... I would recommend you to ask Efe anyway ..
|
|
| 08.05.2020 14:13 | # 3 |
 b55can |
|
|
Do you have 98 model 206? There are many friends who put the make-up case headlight on 99-2000-2001, I see but I do not know how. I hope the answer is in the forum. |
|
| 08.05.2020 14:13 | # 4 |
 okan77 |
|
|
old headlights are using uniform h4 bulbs. In the new type, long and short apart. h1 h7. sockets need to be distributed separately. Practicing friends will help.
|
|
| 08.05.2020 14:13 | # 5 |
 hasimayaz |
|
|
by replacing the socket .. the housings are the same
|
|
| 08.05.2020 14:13 | # 6 |
 F-Eren |
|
|
[QUOTE = hasimayaz] by replacing the socket .. bodies are the same [/ QUOTE] Exactly :)
|
|
| 08.05.2020 14:13 | # 7 |
 ErolSen |
|
|
[QUOTE = okan77] old headlights uniform h4 bulb is used. In the new type, long and short apart. h1 h7. sockets need to be distributed separately. Practicing friends will help. [/ QUOTE] In new types, I know h7 shortly. source : http://www.yedekparcasiparis.com/haberler.asp?nws=10 |
|
| 08.05.2020 14:13 | # 8 |
 berko |
|
|
I have a 2003 model, there was an old type headlight, I put on a new type. But in my vehicle there were two wires according to the installation, I plugged it into the other socket without any problem. I do not know what the situation is in vehicles before 2003, but even if the electricians do not have a socket.
|
|
| 08.05.2020 14:13 | # 9 |
| Meco |
|
|
What about the headlight motors or incompatibility?
|
|
