206 Headlight Dimming Work (with Picture)

Hello friends ... I had previously thought about darkening my eyes. I bought Angel when I was idle so I said to open it and I opened the headlight on my first try. There are not many photos in detail, but I will share it in more detail while opening the second shadow. For now, manage with these squares. Mazeler Falçata Flat blade screwdriver First of all, I cut the upper part with the cutting tool with the brush until the deep part of the middle part came down deeply with nice slow movements. In other words, I heated the area I cut with a hair dryer and plowed it with a screwdriver and proceeded with small movements. It is already soft when heated. It goes straight away without difficulty, when we see the plastic and the silicon part inside by scraping the screwdriver and leaving it with a little force, we go forward by 2 cm. .. 206_XS2012-05-27 23:17:45

because when & nbsp; done okay & nbsp; & nbsp; what I'm going to do now is headlight dimming & nbsp;

[QUOTE = ibrahim.kut] when because & nbsp; okay in it & nbsp; & nbsp; what I'm going to do is now headlight dimming & nbsp; [/ QUOTE]

yes what do I look like? Bid is my case with a headlight.

[QUOTE = ibrahim.kut] yes what i will look like bid would it be the case with my headlight anyway if i bought these headlights 2001 model case [/ QUOTE]

I'm still wondering how you opened that headlight :)

[QUOTE = GiTaRRa] I'm still wondering how you opened that headlight :) [/ QUOTE]

I made it to the headlights on the vehicle. My teacher had a small opening in it. I couldn't find it occasionally. Yesterday the new one came, I opened it and darkened it, you made the next plastics too tight, be careful when you close it back, do very fine work silicone. img src = "smileys / smiley36.gif" border = "0" alt = "LOL" title = "LOL" />

[QUOTE = GiTaRRa] I'm still wondering how you turned on that headlight :) [/ QUOTE]

As someone who has opened 3 headlights so far, let me tell you the easiest way, From the inside, that is, from the probe with the signal lamp, gently forwards to hold it with your hand, then pull it very slowly (if someone is next to it, hold it with a powerful blow dryer), but do not rush the silicon quite slowly, leaving the headlight glass :) )

silicone last stage did you use black silicone, is it transparent & nbsp ;?

Health to your hand.

Is this how we turn on the 307 headlights? Or does the lamp part come out from the inside in a round shape? I want to apply angel but when I turn on the headlight, I am worried that there will be a water intake problem in the future?

?

[QUOTE = 206_XS] silicone is the last stage you used black silicone, is it transparent & nbsp;? [/ QUOTE]

I used transparent for the first things, but black is definitely better use black. Since it is black, it does not show up when you silicone.

[QUOTE = teoman_40] Is this how we turn on the 307 headlights? Or does the lamp part come out from the inside in a round shape? I want to apply angel but when I turn on the headlight, I am afraid that there will be a water intake problem in the future? I would be glad if you helped. I think it's okay if you are beautiful silicones. ultimately fab. silicone headlight at the outlet.

[QUOTE = ufuk91]
Did you use [QUOTE = 206_XS] silicone last stage black silicone is it transparent? Use it, you can see if it is full or not, it is black, because it is black and plastic, it doesn't grin when you silicon. [/ QUOTE]
I understand. I got black silicone. When the process is over, I will share the pictures of my silicones here.

Dimming is complete & nbsp;

I have saved the page as a health care offline to my hands that have been working well.

I will help you at msg where you hang out I'm in Corlu :)

[QUOTE = 206_XS] I will help you at msg where you are stuck. I'm in Corlu:) [/ QUOTE]