206 HDI TRACTION PROBLEM

Hello,

I have 206 HDI 2006 tool. When I have to accelerate when I need to accelerate suddenly, the fault lamp lights up in the 2nd or 3rd gear and the traction of the vehicle decreases. Why does the vehicle not go over 3000 cycles? Why is the car & nbsp; not turning on the turbo? Also, sometimes when it stops & nbsp; lamp & nbsp; goes off When I do the same loading, the fault turns on again. & Nbsp;

Thanks in advance:) & nbsp;

likely to be an injector. either an injector or a turbo diorum.

Replace your diesel filter, I know it is 100 TL original. my 406 had also passed

there may be an air flow meter. my socket had come out and the same thing had happened to me. look at the flow meter cable

There may be turbo hoses, if the catalyst is clogged, exhaust gas may enter the turbo (if km is high)

In the same problem, when I went to the mechanic, he had said that the air captor had to change, he had concluded from the breakdown of the vehicle connected to the bs.

I also had the turbo hose torn and changed

the air flow meter was in me it was not taking over 40tly they repaired that tool.

[QUOTE = baroff] is the air flow meter that has happened to me.

Air flow meter
Is there a mechanic in Ankara where you can have it repaired? Thank you...

[QUOTE = samet2461] [QUOTE = baroff] is the air flow meter that happened to me. [/ QUOTE] this was what I said was the ones who said the turbo hose injector valve was said a lot but I changed the air flow meter did not change the traction problem, only exhaust fumes too much service heating box and glow plug did not change the traction is good now just comes from the exhaust pressure with exhaust pressure like the compressor I do not know if I change the heating box and spark plug