206 hdi problem |
|
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 |
08.05.2020 15:13 | # 1 |
desert197 | |
We went and connected it to the machine, the crankshaft sensor malfunction and the air intake sensor malfunction appeared. We just replaced the crankshaft sensor. There was no stopping on the road, but an hour after stopping the car and it does not work again in the morning. engine running. I'm sorry I told you very confused, but I'm tired of going to industry now. I am still calling out to the masters and experienced friends.
|
08.05.2020 15:13 | # 2 |
Serhun | |
Hello, the part you said is manual pumping, you mentioned that you have changed this part of the vehicle, if there is a check valve on this system and this system was canceled when a new one was installed, it may be going back to the diesel tank. In addition, the air remaining in the system should be discharged by itself after the vehicle starts, if there is an air that is not discharged, you can evacuate from the appropriate places and apply fuel to the system with a manual pump. In order to find out whether this problem is due to fuel supply or not, before starting the ignition, when we open the contact and wait for the operation 2-3 times in succession, we find that the problem arises when the vehicle starts. I had used 206 two years ago, I do not remember the system, in general, every diesel vehicle has the same structure. |
08.05.2020 15:13 | # 3 |
klemann | |
I think if there is a leg by pressing air from the diesel tank.
|
08.05.2020 15:13 | # 4 |
desert197 | |
I did the event you said, worked the vehicle. As you said, I suppose the fuel supply is supposed to be exactly how we will solve this problem. I am tired now.
|
08.05.2020 15:13 | # 5 |
desert197 | |
The problem is solved. There is no problem when replacing the diesel filter with the original. For those who encounter such a problem, the check valve in the sub-industry diesel filter quickly deteriorates.
|
08.05.2020 15:13 | # 6 |
Guests | |
Thanks Useful Sharing Get well soon |
08.05.2020 15:13 | # 7 |
Guests | |
Get well soon. Whatever it is was very simple. Here we can understand the importance of the original part here. I guess that from now on, you will enjoy your vehicle with both fuel economy and driving ...
|
08.05.2020 15:13 | # 8 |
desert197 | |
Yes, you are right. At low speeds, the traction has improved and I will renew the clutch then my vehicle will not stay in place anymore. Thanks for your interest to everyone ...
|
08.05.2020 15:13 | # 9 |
Muhammet CAKIR | |
Come on late :) thank you for the information you provided .. if it comes to our press, keep it in mind
|
08.05.2020 15:13 | # 10 |
Serhun | |
Is the lion piece stronger now? I am glad that the problem is fixed, I wish you goodbye.
|
08.05.2020 15:13 | # 11 |
desert197 | |
[QUOTE = Serhun] Is the lion piece stronger now? I am glad that the problem is fixed, I wish you goodbye. [/ QUOTE] thanks
|