206 hdi airbag malfunction lamp

The airbag lamp of my vehicle burned to the ground where I was, I thought it was about -20 degrees in winter. But what could be the reason why the lamp never goes out? I would be glad if anyone can help what is the solution.

Another chronic malfunction in the 206s is the malfunction you mentioned. There is a circuit under the seats for the air of that side. He usually does it from here. To be sure, you need to connect to the computer and see the error codes that appear.

@koliva is pretty well explained. Look at the socket underneath in both seats. Or take a look at this when the vehicle is in front of your vehicle etc. The driver breaks the airbag wrap. If there is the shortest path, connect it to a test device. It may have recorded an accident.

thanks.

If one of these faults does not occur, look at the battery and make it when the battery is weak from the cold.

lights up when playing with seat adjustment

I connected the vehicle to the computer, the error was deleted, and the lamp did not go out. "There's a strip movie under the steering wheel," he said, which was broken. What do you think is right? I think I can do if I can remove it, but I don't know how to disassemble it. Does anyone know?

I made the fault myself. I removed the airbag unit from the steering wheel, then I removed the steering wheel. There is a 7-way film wrapped in white inside the unit where the signal arm is connected. If one of its ends is not in full contact, I applied some pressure on it and reconnected the unit. The malfunction lamp did not illuminate, no problem.

Very nice. The repairs made without changing the parts are for me. Congratulations.