206 gti rear torsion :(

slm friends I have completely undergone rear torsion balls etc. There was a sound like it used to hit iron and iron. Now 1 month is over, and that sound came again, this time it was harder, but where do you think the new design would be, this sound comes more from the left back :( ...

slm my friend, 2o6 gti in me, the problem is the same torsion in my car. & nbsp; In my left voice, I heard a worm on the sidewalk, but the man who did it did it. I showed it to another mechanic again. He said that he would go to the tornos and be done. If you received a blow, I asked him for the cost of the sound, even if the bells changed or something. I will get it done as soon as possible & nbsp;

I wonder if the sound comes from the left foot, do you know exactly which piece should turn into the lathe? According to him, I tell him too nervous about the staff :(

The water back torsion called to me is brought into the tornier which will be inserted completely and be corrected there. But with the repairman, we said we went out to walk around, he said the sound coming from the back left. The trapezoidal warmis room is empty and passed through a small set, as you say, iron, wuruyoo, like sound. standing can be a problem.

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = lew40] slm friends rear torsion I spent balls etc. There was a sound like it used to hit the iron iron from the past. 1 month has passed, and that sound came again, this time it was harder, whereas everything you think could be the new design, this sound comes more from the left back :( ... [/ QUOTE]

I have the same voice on the back left, I looked all over, I couldn't find anything yet I didn't take it to the mechanic, I hope it won't be a big expense, my car's rear torsions have not been changed for 4-5 months.

ewet friend I have the same in me I will be crazy. Let's go to the service on Monday, if I find insallh, I will look at it in the morning again in the morning.

I made it completely, the friends will get out of the rear axle and go to the turner, the ball will change as a team, even if there is a problem in the cartridges, the room will change (4 cartridges) & nbsp; of course, there is an ammunition, if they are not strong, then the axle will be re-installed. cost Turner wants around 150 TL, 2 shock absorbers, 190 TL, 4 cartridges 80 TL, torsion set 150 TL, now I have done 570 TL plus workmanship in your master. There was a lot of noise from the back right now, there is no sound left, only my tires need to be replaced. How happy if I was able to inform me ...

570 + workmanship .. refreshing the inside of the human being ... I was thinking about opening and maintaining and closing it to reduce the distress at the momentions .. at the moment my lips turned cold.

I spent 1100 TL oil, undercarriage kept it all. I was so bad but the car was very nice. There is nothing to do. Damage is done early.

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> Do not make or sell 1000 tl cost or other way I bought it, I bought it close to 2 thousand. I already swear it, now I swear, I am very nervous. If I get cold from the car, it will cost you as much as you say and my salesman will probably be ufuk91 2012-04- 01 00:23:08

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = lew40] ewet friend is in the same I will. Let's go to the service on Monday and see if I find insallh again in the morning, I will share it with you if they find insallh ... [/ QUOTE]

buddy come on me anyway, you have reconstructed the back team but also the sound continues, according to what your friends say what is opening up a lot of new expenses, whether it is doing something else or not, it will be a familiar master of the job, it will only repair you for the place where the sound comes from, instead of spending it, I will sell it personally so I will not spend 1000tl in life.

We burned off, ate my patterned shoulder, this torsion of my shoulder will be crazy whoever did the torsion work from peugeot a eyes operimm ... & nbsp;

friends I just bought the car and put it into maintenance. When I had a very bad sound coming from behind, I got them all done. My car 206 2003 model 1.4 hdi x-line. my expenses < div> motor protector: 50 tl

swing: 150 tl & nbsp;

rod end: 40 tl

rod shaft: 25 tl

torsion repair kit: 150 tl

rear cartridge: 80 tl & nbsp;

rear shock absorber: 180 tl

lathe, tie rod balancer, labor

. I am also going, but there is nothing to do.

Mine has also been taken care of, so 1000 or something is left, but I think I will put it on without waiting because of this sound ...

By the way, I covered the trunk with a sound insulation sponge recommended by the officer at IKEA today, but I wanted one. He said that you will get more economical and better results. There was a tube in the trunk. When I have time, the first thing is to remove the door trim and stick the same substance to the doors. One side sponge sticks on one side, and it adheres pretty well, I would recommend it. 0 = 0 & amp; 0 = 0 & amp; 0 = 0 ">

friends, I have just made my torsion, my car is 106 q. my master told me that his torsion shaft would be longer without asking me and he said that his life would be longer by raining from the abura from time to time. I have a fine-minded master.

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = ozdemirosman] friends are considered to have just made my torsion My car 106 Q. My master made a couple of grease fittings where the torsion shaft was there without asking me and said that it would be longer by raining from the abura from time to time. . [/ QUOTE]

I wish my teacher was in the mainland? & nbsp;

I am also looking for a new master in Ankara. ..

If I find a man like a man that I can take with ease or care,

Just like my brother, the same problem is in the war, I got war, I said the mechanic, the lathe or something, he said to me. I eat my heart as I pass through the pit.

So, the sound was cut off, it was stale on my tires and I changed them too, it was very nice, there was no sound left.

[QUOTE = ufuk91] & lt; = "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0" & gt; [QUOTE = ozdemirosman] friends, I have just made my torsion, my car is 106 q. my master has made a couple of grease fitting to the place where the torsion shaft is without asking me and occasionally, I think it will be longer with raining from the abura, I think it will be longer when making my reasonable advice. I have a master who thinks things like his own car without asking me. [/ QUOTE]

I wish my teacher was in the mainland? & nbsp;

I am also looking for a new master in Ankara. If I find a master (like my previous master) who really understands from peugeot and does his best to pile up the man with the fear of God. ..

If I find a man like a man that I can take with ease, I am in Ankara [/ QUOTE]
I am in Ankara, I couldn't find anybody yet. He wants a torsion again. There is a wrc peugeot in the back street of the passing auto, there is no difference in the room.