206 GTI P0113 fault code

first of all hello to all of you; my car got 2000 model 206 GTI; I got P0113 and P0135 errors when I connect it to pc P0113: Intake air temperature sensor circuit, plus short circuit or open circuit P0135: fault in oxygen sensor heating circuit (row 1 sensor1) was writing this shape on pc screen. How can I fix these errors? I think the error P0135 is because the air fuel ratio could not be adjusted in the cylinders due to the other error. There is no noticeable difference in traction, but when the vehicle stopped at idle, it seems like drowning. Normally there is no idle ripple, it is similar to LPG, but it starts to fluctuate as if it stops when you touch the gas very little and it does not set the ECU. sometimes I feel like drowning when I do it, I think I can tell the symptoms clearly. If we turn off at idle, late work is always ongoing, but I am waiting for your help.

Oxygen, lambda sensors, if you have the opportunity to change, change both, there is sometimes no efficiency in the sub-industry sensors. Do not forget there will be a change, cancel the check sensors when the engine is cold, use it, but you will use it in LPG. If you use it in gasoline, you will get an error code.

The symptoms are similar to crank, the diagnoses I made are correct, sir, then

updated +++ Is the intake air temperature sensor and maf sensor the same sensor?

They have been published on a site. What is Air Temperature Sensor? (Intake Air Temperature Sensor) The part that senses the temperature of the air entering the intake manifold and transmits this information to the Electronic control unit is called the intake air temperature sensor. The intake air temperature (IAT) sensor can sometimes be found as a separate sensor, sometimes in a single body with the MAF sensor, sometimes in a single body with a turbo pressure sensor. located before the intake manifold. The intake air temperature sensor is usually not available as a separate sensor, but with the MAF sensor or with the MAP sensor. In new generation vehicles, it is usually found inside the part named MAF (Air flow meter).

2000 gti, where is the place, or if I ask you, I don't know whether there is a map or maf how can I find out where the sensor is? I'm looking at the intake manifold. If you help me, it will be very acceptable. My teacher is drowning.

Does the location look in this photo, I wonder if the sensor I am looking for

update ++

If I can find the location of the maf sensor in the photo, I can find the iat sensor.

it is usually on the intake manifold. In the site I have given in the attachment, there is a Turkish support, the place of the teacher. Track number 8. https://partsouq.com/en/catalog/genuine/unit?c=peugeot&ssd=%24%2akwevgwods3otw3hdfvıdoxdjq0rakyqpkdopn2l5fhvvzvh2ıc8ww19pki0tk2cxjd9px3r-efxpkaj7zyrblyhcym18lcm1cxlbyt9xcn1mamw9pipkss05nwron2loaxn_bzk5fmonp14rwy0totvmcgzbkk04mt5zkqn6yz8wovgtwfoqzhcraaaaal304t8%24&vid=0&cid=11&uid=0&q=

thank you so much teacher