|
|
|
|
206 GTI ENGINE ... |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 14:55 | # 1 |
 scorpions_64 |
|
|
|
|
| 08.05.2020 14:55 | # 2 |
 TA3537 |
|
|
If your car's engine is running like a diesel, it's your problem. 16 of the cups are solved when these change.
|
|
| 08.05.2020 14:55 | # 3 |
| scorpions_64 |
|
|
what is the cup? I ask because I don't understand much. so how long are they?
|
|
| 08.05.2020 14:55 | # 4 |
 ulasbey |
|
|
I think that the cup means "valve" :) There may be a problem with the valves. As for the airbag light, if it flashes once in a while and then goes out, try this; You will see sockets under the front seats, examine the structure of these sockets, pay attention to the colors of the wires. Then cut those sockets from there, insulate the cables directly together and insulate them with tape. most likely the problem will be solved. it was extinguished in me too, it didn't burn anymore;)
|
|
| 08.05.2020 14:55 | # 5 |
 BAHTIYAR |
|
|
one of the valves (it is a repellent prod) it costs 53 lira 16 it would have been too expensive for me too but it was light I already put boron power and 10 60 oil just make some noise in the first starts
|
|
| 08.05.2020 14:55 | # 6 |
| scorpions_64 |
|
|
Thanks for your interest, if the cups are 53 lira, it will cost us a lot :) When it came to the airbag lamp, the auto electrician canceled the sockets under the seat directly, but the problem was not solved: Normally, there is a sensor in the seat belt pulley, which means that we think it was removed from it.Where can I find this reel sensor? |
|