Peugeot Forums - Peugeot Fan Club

206 glass module help

Homepage » PEUGEOT MODIFIED PLATFORM » Modification and Tuning Information
08.05.2020 15:26 # 1
emrnl
friends I want to have a glass module installed on my 2001 model 206 but my car does not have an alarm system. What is the cost? Thanks in advance
08.05.2020 15:26 # 2
Ozgur
I THINK THERE WAS A PRICE OF 20 TL.
WITHOUT ALARM.
08.05.2020 15:26 # 3
emrnl
Thanks for this single glass, by the way, right?
08.05.2020 15:26 # 4
Ozgur
FOR 2 PREVIOUS GLASS.
TOTAL SIDE 20 TL.
4 GLASS IS FOR AUTOMATIC 30 TL.
08.05.2020 15:26 # 5
emrnl
this was better :)
08.05.2020 15:26 # 6
Guests
Will there be a lot of alarm in the center of the vehicle without alarm?
08.05.2020 15:26 # 7
Ozgur
VALLA AS YOU ARE Telling THE RIGHT.
BUT I SAWED IN THE VEHICLE WITHOUT ALARM.
WHAT YOU SAY SUCCESSFUL PERSON.
08.05.2020 15:26 # 8
UGuRs
they were wearing 25 lira they said to me
08.05.2020 15:26 # 9
Guests
I couldn't say anything because I'm not sure. they connect the module in the alarm in case of alarms. If this module can be connected without the alarm, I was wondering where they get this trigger.
This heat is probably doing in original vehicles.
08.05.2020 15:26 # 10
ose
it gets stuck, so the central lock has it, so the output doesn't matter.
08.05.2020 15:26 # 11
Guests
I asked, both of them are sold separately and can be installed separately.
08.05.2020 15:26 # 12
Guests
I bought the Cenmax Glass Module, but he said it will not work without alarm.
I Visited 6 Electricians Absolutely Sure The Alarm Module Will Not Work Göz Kırpma
08.05.2020 15:26 # 13
metin
I think do not use modules other than the original. I was going to have it installed for my old vehicle. If I can find it at home, I can send it to anyone, but I do not recommend it.
Each time the glass module tool is locked, it energizes the motor to control it, even if the window is closed, and if the window is closed, it has difficulty in the module. The module does this every time it locks its vehicle, and after a while, its glass engines, which are subject to strain, burn.
Leaving the window open while locking the vehicle slightly reduces it, but each time you lock the vehicle with the window closed, the module forces the engine to close the window and leaves it because the window is closed. You can get the engines in a few months.
08.05.2020 15:26 # 14
Ozgur
AS TEXT SAYS.
I DID NOT TAKE THIS SO FACE.
08.05.2020 15:26 # 15
toprakk
module does not work without alarm. Not everyone can put an alarm on pugs. He wants a little too much on your wearer.
08.05.2020 15:26 # 16
metin
The module [QUOTE = earth] does not work without an alarm. Not everyone can put an alarm on pugs. it wants a little too much on your wearer. [/ QUOTE]
I have a module but no alarm. When I press it, it closes the windshields + rear windows + sunroof.
I do not recommend the original module
08.05.2020 15:26 # 17
Guests
the man said I would have it made 60 papers .. I did not get the front two glasses .. more suitable ...
08.05.2020 15:26 # 18
metin

If you do, you need to enter the details, you should have switches, because, as I said, the module forces the glass to make sure that it is locked and the engine will light up after a while. If there is a system with a switch, no load will be placed on the engine while the window is closed. it doesn't even work because it's already closed. so no problem.

08.05.2020 15:26 # 19
Guests
My electrician said a little too much, installing an alarm for Peugeot ...
But he said we will do it again, it will not exceed 40 TL at the price they will get from me.
I Had It In My Previous Vehicle I Was Very Satisfied Room Cenmax It Was Both Alarm And Module
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”