206 gas pump relay

Friends, when I turn on the ignition of the vehicle, there is no sound from the pump, but now it does not come and the starter does not start even though it starts. Most likely it is from the gas pump relay because the car is running and sometimes this problem does not work.

https://imgyukle.com/i/v24mqp

You can't see the ecu without removing it, it stays at the bottom

I removed it, there is nothing.

It is screwed under the ecu. When you say under it, it is attached to the gold

Unfortunately, I wonder if the master bit canceled this or took it somewhere else

Today I gave electricity to the gas pump with a small 12v battery. I tried it before, it sprayed gasoline. It does not react at the moment.

https://imgyukle.com/i/vexfq is umut1001 2020-01-19 22:35:45

If it gives voltage but does not work, there may be a problem. Unless you're putting voltage on the right ends.

I gave the two rightmost ends in the picture. When the cable is attached to the pins corresponding to the red and (green yellow) wires. Red should be + as usual.

[QUOTE = umut1001] unfortunately, I wonder if the officious bit master canceled this or bought it elsewhere [/ QUOTE]

I called the master at the Paris auto masseur. The electrician asked the master there. He said there was no gasoline pump relay in the 2008 models of 2006.

pump motor is burned. Battery connected is not working.

I changed the motor of the pump. The car is running. The gas gauge is also working. But I raised a spring from the float, I hope it will be 10cm as much :)

bow looks in this picture.

https://imgyukle.com/i/noy7rs https://imgyukle.com/i/nocuvt