|
|
|
|
206 Front spring shortcut Hk. |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 19:18 | # 1 |
 Ert.Kckrk |
|
|
I've been apart from the forum for a long time :) 206 1.4 I want to print the front of my HDI vehicle. One side says let me take a sports bow, The other side says take a short cut and springs: D What do you think I should do, you know better than me My car's picture on 14 rims is available in the attachment Best regards :)  |
|
| 08.05.2020 19:18 | # 2 |
 TugyyStyle |
|
|
It's time for the lion's circumcision, brother 
|
|
| 08.05.2020 19:18 | # 3 |
 korkusuz202 |
|
|
They say the stew of cheap meat is not eaten. If you cut the springs, you will get the image you want. But this will be cheaper to you, but besides it has disadvantages, once the comfort will be zero, the front team will deteriorate quickly because it loses its stretching feature. but if you buy something high quality, it will provide you with enough comfort, you will get the image you want, if it is a little bit. started.. I http://forum.peugeotturkey.com/forum_posts.asp?tıd=38787&title=206-14-hdi-spor-yay-tes |
|
| 08.05.2020 19:18 | # 4 |
 samet206 |
|
|
To cut a bow is to get in trouble when I say cheap. |
|
| 08.05.2020 19:18 | # 5 |
| Ert.Kckrk |
|
|
Ahahahha is true: D: D |
|
| 08.05.2020 19:18 | # 6 |
| Ert.Kckrk |
|
|
[QUOTE = fearless202] They say the stew of cheap meat is inedible. If you cut the springs, you will get the image you want. But this will be cheaper to you, but besides it has disadvantages, once the comfort will be zero, the front team will deteriorate quickly because it loses its stretching feature. but if you buy something high quality, it will provide you with enough comfort, you will get the image you want, if it is a little bit. started.. http://forum.peugeotturkey.com/forum_posts.asp?tıd=38787&title=206-14-hdi-spor-yay-testi[/quot A] So do you think it should be 3.5m or 5m
|
|
| 08.05.2020 19:18 | # 7 |
| Ert.Kckrk |
|
|
http://www.sahibinden.com/ilan/yedek-parca-aksesuar-donanim-tuning-aksesuar-tuning-otomobil-arazi-araci-pejo-206-apexi-spor-yay-5-cm-peugeot-helezyon- sports-spring-team-177418805 / detail Is Option 1 http://www.sahibinden.com/ilan/yedek-parca-aksesuar-donanim-tuning-aksesuar-tuning-otomobil-arazi-araci-peugeot-206-3-5-cm-spor-yay-helezyon-156934677/ detail Is Option 2 |
|
| 08.05.2020 19:18 | # 8 |
| korkusuz202 |
|
|
brother, if you are going to buy the spring one time, good thing so that you will be pleased ... Normally when you put a bow on a standard vehicle, you are going to use comfort as a bike without a shock absorber :) If you ask me EIBACH for comfort and low level of comfort. The guys did not like to praise the brand. If you are going to do such a project, you will not avoid the expense. If you do not have a budget, do not escape cheaply. If there are 5 fingers between the fender, 2 fingers in 5cm bows, 3 fingers in it, but it has a little difficulty. http://urun.gittigidiyor.com/otomobil-motor-aksesuar/peugeot-206-spor-yay-eibach-5-cm-lik-tuv-belgeli-168776137 Note: On 206 vehicles, only 2 springs are attached to the front. Since there is torsion in the back, go to a good master and get a separate workmanship for torsions. |
|
| 08.05.2020 19:18 | # 9 |
| Ert.Kckrk |
|
|
Thank you for your interest in the subject, I will post the pictures when my project is completed.
|
|