206 front fog ... - 206 - Peugeot Forum

The working principle of the fog in Peugeot 206 is as follows,

Every vehicle has a rear fog. Front fog is optional. For vehicles of 2003 and above, fog control is the middle level of the headlight arm. It is active once you turn it towards the dial and release it. It turns off if you turn it in the opposite direction.

If you only have a rear fog lamp, the rear fog is opened in the first stage and the rear fog is closed in the first stage. In order for the fog to be opened from this button, at least the parking lamps should be lit and the contact should be in the battery position.

If there is a front and rear original fog lamp, the front fog lights in the first stage and the rear fog lights in the second stage. In the first stage, the rear fog goes out in the second stage. Likewise, at least the parking lamp should be on and the contact should be in the battery position.

In addition, when you light the long fog while the front fog is on, the dipped beam and the front fog shuts off automatically, and if it is on, the rear fog lamp lights up. When you turn off the high beam, it will be restored. The momentary selector command does not affect fog.

My advice to you is to activate the front fog of your vehicle from the system so that your headlight arm opens the front fog in the first stage and the rear fog in the second stage. I know that there is a relay place for the front fog in the engine fuse box.

08.05.2020 18:52	# 1
Adem Kurtuldu
my car 206 2006 model x design. Normally, there is no front fog in my car, but it will be installed later, but the front fog is used as a park fog without burning the headlights, or will I have it done by myself?

08.05.2020 18:52	# 2
Mesut48
Park + fog, good luck.

08.05.2020 18:52	# 3
samet206
I can say that it is used in the original, only the headlight is required for the rear fog. If there is a button on the hidden place outside of it, it does not matter, so it does not matter. If you do not have this function in your control arm, you should be forced to put a button, if the control arm supports it, you can activate it and use the original system. It can be provided in control with the button.

08.05.2020 18:52	# 4
Alicilik
The working principle of the fog in Peugeot 206 is as follows, Every vehicle has a rear fog. Front fog is optional. For vehicles of 2003 and above, fog control is the middle level of the headlight arm. It is active once you turn it towards the dial and release it. It turns off if you turn it in the opposite direction. If you only have a rear fog lamp, the rear fog is opened in the first stage and the rear fog is closed in the first stage. In order for the fog to be opened from this button, at least the parking lamps should be lit and the contact should be in the battery position. If there is a front and rear original fog lamp, the front fog lights in the first stage and the rear fog lights in the second stage. In the first stage, the rear fog goes out in the second stage. Likewise, at least the parking lamp should be on and the contact should be in the battery position. In addition, when you light the long fog while the front fog is on, the dipped beam and the front fog shuts off automatically, and if it is on, the rear fog lamp lights up. When you turn off the high beam, it will be restored. The momentary selector command does not affect fog. My advice to you is to activate the front fog of your vehicle from the system so that your headlight arm opens the front fog in the first stage and the rear fog in the second stage. I know that there is a relay place for the front fog in the engine fuse box.

	206 front fog ...
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206