|
|
|
|
206 Fog Lamp |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 15:08 | # 1 |
 erdal |
|
|
|
|
| 08.05.2020 15:08 | # 2 |
| erdal |
|
|
At night, I threw my hand from the bottom, but it came off as if it was closed, I came to my head now ..
|
|
| 08.05.2020 15:08 | # 3 |
 MemoTech |
|
|
There is a place in the hood that can be opened like a window.
|
|
| 08.05.2020 15:08 | # 4 |
| erdal |
|
|
Hmm, I couldn't see it, but you are sure my teacher 206 because this is the case?
|
|
| 08.05.2020 15:08 | # 5 |
| MemoTech |
|
|
I have my car in both hoods. If you notice, it is not visible, it does not attract attention.
|
|
| 08.05.2020 15:08 | # 6 |
| erdal |
|
|
I understand, it may not have caught my attention. I look at it in the morning.
|
|
| 08.05.2020 15:08 | # 7 |
 phaselispa |
|
|
I had it like Benz force but I completely removed my bumper. Though my fog changed completely. yes, there is such a square piece there, but I don't think that fog can be reached from there.
|
|
| 08.05.2020 15:08 | # 8 |
| erdal |
|
|
[QUOTE = phaselispa] I had the same benz force but I completely removed my bumper. Though my fog changed completely. yes there is such a square piece there but i dont think you can reach the fog from there. [/ QUOTE] Do not do a lot of work to remove a bumper for a bulb replacement now .. I hope there is no need ... |
|
| 08.05.2020 15:08 | # 9 |
 tigerland |
|
|
turn the tire in full turn you will see the hood of the hood facing the front part of the tire, you must pass it through the bottom, and you will remove it, then the back of the fog is round, the cover is removed, and finally it is held with a wire to remove the bulb. if you try, you do
|
|
| 08.05.2020 15:08 | # 10 |
| erdal |
|
|
[QUOTE = tigerland] turn the tire in full turn you will see the hood of the hood facing the front part of the tire, you must pass it through the bottom, and you will remove it, then the back of the fog is round, the cover is removed, and finally it is held with a wire to remove the bulb. if you try, you do [/ QUOTE] Thank you very much, teacher.
|
|
| 08.05.2020 15:08 | # 11 |
| tigerland |
|
|
[QUOTE = erdal] [QUOTE = tigerland] turn the tire in full turn you will see the hood of the hood facing the front part of the tire, you must pass it through the bottom, and you will remove it, then the back of the fog is round, the cover is removed, and finally it is held with a wire to remove the bulb. if you try, you do [/ QUOTE] Thank you very much, teacher. [/ QUOTE] THE PLASTIC FULLY DOESN'T UPPER SIDE INCLUDES WITH THE INTERNAL SIDES AND THE LOWER THREADS AND THE POWER TOGETHER IS ALREADY OPENED. GOOD LUCK WITH
|
|
| 08.05.2020 15:08 | # 12 |
| erdal |
|
|
[QUOTE = tigerland] [QUOTE = erdal] [QUOTE = tigerland] turn the tire in full turn you will see the hood of the hood facing the front part of the tire, you must pass it through the bottom, and you will remove it, then the back of the fog is round, the cover is removed, and finally it is held with a wire to remove the bulb. if you try, you do [/ QUOTE] Thank you very much, teacher. [/ QUOTE] THE PLASTIC FULLY DOESN'T UPPER SIDE INCLUDES WITH THE INTERNAL SIDES AND THE LOWER THREADS AND THE POWER TOGETHER IS ALREADY OPENED. GOOD LUCK WITH [/ QUOTE] Thank you very much bro bro learned I will get out of work :))
|
|
| 08.05.2020 15:08 | # 13 |
 ahmed206 |
|
|
I did not need to open a new topic. The watery fog in the photo belongs to my vehicle. It's been about 1 month, thank god the lamp hasn't burst yet. Is it possible to drain this water without removing the bumper?  |
|
| 08.05.2020 15:08 | # 14 |
 Bugra |
|
|
They are two parts, if you remove the ten parts, you will reach the fog light more easily.
|
|
| 08.05.2020 15:08 | # 15 |
| ahmed206 |
|
|
Let me send my wife to a country, I'll gather the team and run down 
|
|