206 FOG IS VERY EASY TO INSTALL

Hello friends I have been planning to wear 206 ma fog lights for a long time. And finally I did this and shared it with my photos saying that it will also benefit my other friends. Those who wonder if they can contact me about the things that are on their mind. We carefully cut and extend those alignments from the back of the bumper from the inside out. Then, after opening our fog holes, we try the original fog suitable for your vehicle. For this, you will see the feet and nails required to install the fog lights at the rear of the bumper. (3 of them, two of them, one of the bumper nut) We carefully install the fog lights here. It is up to you, your friends ... We have used 1000w h1 xenon bulbs for your fog lights. You can also install another bulb if you want to be h1. You can notice the expression of looking at the envy of the people on the night trips, friends and you love your car a little more ... Waiting for your comments, friends. Regards to all of you, Yours ..

My friend, your vehicle is very beautiful. but so much effort has been spent. If you found a rc bumper, you would have a fog light and your vehicle would look more elegant. but still your car is very nice ..

Let me share very well. Very nice and well-seated vehicle. Reviews Thanks. Reviews

[QUOTE = bugrature] my friend is a very nice vehicle. but so much effort has been spent. If you found a rc bumper, you would have a fog light and your vehicle would look more elegant. but still the vehicle is very nice .. [/ QUOTE]

[QUOTE = simurg] [QUOTE = bugrature] my friend is very nice. but so much effort has been spent. If you found a rc bumper, you would have a fog light and your vehicle would look more elegant. but still the vehicle is very nice .. [/ QUOTE]

Congratulations, do you take out good workmanship, it has been a useful share for those who have 206

Good health. How did you handle the cost of fog, xenos and craftsmanship?

[QUOTE = gibso] good health to your hand. How did you handle the cost of fog, xenos and craftsmanship? [/ QUOTE]

I also got fog. If you get the fog lights right, the cost is:

pair of fog 100 lira. There was no light bulb on the
, I put osram h1 hyper white for 40 lira. I remember that I gave 10 lira for connection cables, hose etc. > it cost 180 lira in total.

it would be better :) I got the fog wrong did not fit the bumper. I did not hurt, sent it back, got my money. The point I hurt alone was that we opened the hole according to the fog so that we could fit the fog in the bumper, but there was no fog in that hole. For the smooth fog that came after, 2 fingers from all sides remained excessively empty. I had to change the bumper to 100 lira. The paint of the primers kept 100 of the workmanship. In addition to me, there was an additional cost of 200 liras.

I was a novice there too, we used to install the fog and cover it with a white car sealant. Of course, there is nothing to do when you don't know. 200 pounds went.

I bought the bumper with holes, it was the same price. We put the mists in the meantime as little gap left as the pen tip. of course it is so normal. We applied the mastic beautifully to that space and it was like zero space and original. At the same time, with the sealant, there were clicks on my side door belts, we ripped off, we painted with matte black and glued with sealant, it was like stone.

[QUOTE = yenice] [QUOTE = gibso] good health to your hand. How did you handle the cost of fog, xenos and craftsmanship? [/ QUOTE]

I also got fog. If you get the fog lights right, the cost is:

pair of fog 100 lira. There was no light bulb on the
, I put osram h1 hyper white for 40 lira. I remember that I gave 10 lira for connection cables, hose etc. > it cost 180 lira in total.

it would be better :) I got the fog wrong did not fit the bumper. I did not hurt, sent it back, got my money. The point I hurt alone was that we opened the hole according to the fog so that we could fit the fog in the bumper, but there was no fog in that hole. For the smooth fog that came after, 2 fingers from all sides remained excessively empty. I had to change the bumper to 100 lira. The paint of the primers kept 100 of the workmanship. In addition to me, there was an additional cost of 200 liras.

I was a novice there too, we used to install the fog and cover it with a white car sealant. Of course, there is nothing to do when you don't know. 200 pounds went.

I bought the bumper with holes, it was the same price. We put the mists in the meantime as little gap left as the pen tip. of course it is so normal. We applied the mastic beautifully to that space and it was like zero space and original. At the same time, there was a click on my side door belts with a sealant, and we removed it, and painted it with a matte black and glued it with a sealant. It was like stone. Sorry for the information, but I was sorry for you that you made extra charges. so what was the model of the wrong fog, should I buy it from you, or whichever one is best suited for our cars?

Let me explain without branding, do not buy the modified style from places. It looks exactly the same, even says it is compatible with all vehicles after 99. It does not have anything to do with it. In both cases such as 1 week shipping and product return etc., you expect 45 days money back or change refund. & nbsp; I will also share this topic with forum administrators.

I wish the same job would be easy in 307 ..

Sisis original valeo 115 tl two

[QUOTE = simurg] Fog original valeo 115 tl two [/ QUOTE]

Sir, my fog warehouse brand has arrived. they are almost the same price. Is the original valeo warehouse supplier industry?

Yeah

Well, halal, hodja, very congratulations.

It has been a very nice and successful work, congratulations ...

First of all, it is very nice. Use it good bye. I have a question. 2002 206 xr could be done in this way?

simurg mate you were selling angel headlights recently i guess you could sell what happened?

[QUOTE = ERSOY-06] simurg mate you were selling angel headlights recently, guess what happened or did you still have it? Respect?

[QUOTE = mhmtali] first of all, it is very good use goodbye
i have a question 2002 can i do this way in 206 206 xr broker?
[/ QUOTE]