Peugeot Forums - Peugeot Fan Club

206 feline com2000 and small about 3 lines display

Homepage » PEUGEOT MODIFIED PLATFORM » General
08.05.2020 18:35 # 1
ufk_kptn
I want to attach a 3-line screen to my friends vehicle, but when I removed the top cover of the signal in the morning, no matter where I pressed, I did not get a response on the screen, did I do something wrong or do not have this feature on my com2000 unit? Vehicle 2006 1.4 hdi feline
08.05.2020 18:35 # 2
Serkan
As described in the link below, you must first install a 3-line display.

08.05.2020 18:35 # 3
ahmed206
Isn't there a date?
08.05.2020 18:35 # 4
suppor
When I pressed that button, I would not give me instant fuel when I don't have a certain km.
08.05.2020 18:35 # 5
ahmed206
It is a matter of enthusiasm, I say that I have done it well, because my driving has started to notice according to instant consumption.
08.05.2020 18:35 # 6
ufk_kptn
I have a 207 screen, and it would be nice to have a detailed screen like that, but I am hesitant to comply.
08.05.2020 18:35 # 7
ufk_kptn
For example, when I open it like this link, I do not have the piece on the left, which is like the small piece of ice on the left.
08.05.2020 18:35 # 8
suppor
Ahmet does not show the remaining distance after the light burns, right?
08.05.2020 18:35 # 9
Serkan
[QUOTE = suppor] Ahmet doesn't show the remaining distance after the light turns on, right? [/ QUOTE]

Yes it does not, even the light does not show close to burning.
08.05.2020 18:35 # 10
ufk_kptn
My previous vehicle was 207 premium 2008 model, besides the light, the room below 90 km did not show the remaining distance, if I remember correctly.
08.05.2020 18:35 # 11
suppor
There is no day when there is no light in the car, your friend is in the fiesta, 15 10 5 3 shows up to 2 km or even red light, we do not have a room.
08.05.2020 18:35 # 12
Alicilik
Hello sir,

First of all, let me fix this, not the signal, it will be the tip of the wiper arm. If there is a drop-shaped black protrusion under your right mirror, if you touch the floor on the wiper arm, the display will show a degree instead of a clock for 3-4 seconds.

Apart from that, the button has no other jokes on the 2-line display. When you get the 3rd line screen, you can see the trip computer data in detail.
08.05.2020 18:35 # 13
ufk_kptn
When I say hello signal, the habit of the mouth on the right side, the 207 grandfather has the same fold, there is the same unit, I guess I will try again tomorrow, I did not notice anything like a button, I inserted the pen, I pushed the screen, I do not even remember it tomorrow.
08.05.2020 18:35 # 14
Alicilik
[QUOTE = ufk_kptn] When I say hello signal, the habit of the mouth on the right side 207 grandfather is the same, even one to one the same unit I suppose I will try again tomorrow I did not notice anything like a button I inserted the pen I pushed it on the screen I do not even remember it tomorrow I share the experience details with clean head again thanks a lot. [/ QUOTE]

No buttons. There is a wire helix inside the arm. This wire contacts the circuit according to the condition of the arm and performs the function. That is the contact part of the trip computer. When the wire is humped with the help of a plastic rod from above, the circuit is completed and sends a signal.
08.05.2020 18:35 # 15
ufk_kptn
Hello, I tried it, thank you very much. The screen remained, thank you. I mean, I removed the inside of the left signal arm. The devil said, replace the two with each other.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”