|
|
|
|
206 exhaust |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 16:51 | # 1 |
 zgr |
|
|
|
|
| 08.05.2020 16:51 | # 2 |
 koliva |
|
|
It makes the worst sound. Your fuel consumption will increase slightly. Where is the last muffler with a hole in the exhaust?
|
|
| 08.05.2020 16:51 | # 3 |
| zgr |
|
|
[QUOTE = koliva] It makes the worst sound. Your fuel consumption will increase slightly. Where is the last muffler with a hole in the exhaust? [/ QUOTE] the master said this last summer. I didn't care much then. so I didn't ask where. welded a few instead. but all will change, he said. Well, would these holes affect the way the car goes because it seems to me that the car is going hard these days. & nbsp;
|
|
| 08.05.2020 16:51 | # 4 |
 CEM1984 |
|
|
if you have a change, it is not a part of the catalyst or exhaust but the catalyst is expensive but cancel your car relaxes ... |
|
| 08.05.2020 16:51 | # 5 |
| zgr |
|
|
[QUOTE = CEM1984] if you have to replace it, it is not a part but a catalyst or exhaust, the catalyst is expensive but your car will be relieved ... [/ QUOTE] timing set, the rear torsions are now exhaust. the voice became irritating. I think we'll get the third place to change the exhaust.
|
|
| 08.05.2020 16:51 | # 6 |
| koliva |
|
|
[QUOTE = zgr] the master said this last summer. I didn't care much then. so I didn't ask where. welded a few instead. but all will change, he said. Well, would these holes affect the car's travel because it seems to me that the vehicle is going hard this time. & nbsp; If it welded then it probably curled from the middle muffler port of the last muffler. If so, you should replace the middle exhaust + muffler. If your situation allows, change it. Keep in mind that if you need to replace the middle exhaust, there is a spring-loaded mechanism called flange where the middle exhaust connects to the catalytic converter outlet. If that part is not replaced correctly and a high temperature resistant grease such as virgin grease is not applied, you will get a voice called ciyyyk in the first start and gear changes |
|
| 08.05.2020 16:51 | # 7 |
| zgr |
|
|
It affects but I do not think you will understand it very much. If it welded then it probably curled from the middle muffler port of the last muffler. If so, you should replace the middle exhaust + muffler. If your situation allows, change it. Keep in mind that if you need to replace the middle exhaust, there is a spring-loaded mechanism called flange where the middle exhaust connects to the catalytic converter outlet. If that part is not replaced correctly and a high temperature resistant grease such as virgin grease is not applied, you will get a voice called ciyyyk in the first start and gear changes [/ QUOTE] thank you for the information you provided. I have read the song & nbsp; flans you said before in a reply to a topic in the forum. I am not mistaken at the point where the fixed part connects to the movable part. in my mind. thanks again for sharing these subtleties with us.
|
|
| 08.05.2020 16:51 | # 8 |
| koliva |
|
|
[QUOTE = zgr] thank you for the information you provided. I have read the song & nbsp; flans you said before in a reply to a topic in the forum. I am not mistaken at the point where the fixed part connects to the movable part. in my mind. thanks again for sharing these subtleties with us. [/ QUOTE] You're welcome. |
|