206 Door Tapes

Hello friends, you know that my car is in the middle of the glass, there are door tapes, they are exfoliated from the sun. I have to go and paste, I need to paste my heat. Would I like to have the original one?
http://www.peugeotmarket.com/peugeot-206-5k-on-kapı-sus-bandı-sag-orjınal,pr-2082.html Reviews

Master, I made carbon foil. The scrub cleaned the exfoliated areas, then applied the carbon foil on it. It was very nice. There is no picture at the moment but the pattern is as follows

samet, if there is a black film on the glass, I would recommend sticking black foil, if there is no film on the market, there are rough matt black thick foils in the rare places on the market. You can also apply with them. You can also apply with them in a sunny weather. You can apply the one very comfortably under the sun

Thanks to the pattern, it can be considered fearless thanks, but I want to do something flat without a closer pattern, I want to do it close to the original, but I do not have a film yet, but if I can apply it to the lightest shade towards the summer, I try to get a glossy coating close to the original, I did not get the originally sold bands for the answer. Thanks to the vehicle, it is not necessary to strike the heat as it does not necessarily hit the heat, it is applied in a hot sunny weather. 09:27

So if you have a heat gun, it would be better, but do not forget to clean the floor and the places you will bend back with alcohol or spirits by making it under the sun, and it will be warmed by tapping the last curl.

[QUOTE = ramazanturan81] so it would be better if you have a heat gun, but do not forget to clean the floor and the places you will bend back under the sun by rubbing it with alcohol or spirits. > So let me take a 5-minute ride to a coater who does a good beam, let me make the car firmly.

You are Istanbul distillery, let's meet for a weekend, I will stick to it in 5 minutes. I think it would be in matte foil.

Sir, thank you very much for your kindness and your helpful attitude about the subject, but I went out on a new holiday.

I will hose down the issue, but I have the same problem, I don't know how to get rid of it and how to glue it well then ??

I made it, I went to the master, I got the original matte door tape from the particle, got it, delivered it to a friend who made a film, got a tea, took it, got it, it was no different from scratch and it was original, I would regret it if I had made it from the coatings on the market called carbon dia.

Mine is woven in white, white, siritio shiny foil, but the guys are talking about 20 30.

I made an order from the original.

Contact me, I got it, sometime you order 50 cm above the bottom of the foil and you also pay 30-50 TL to stick =)

I suffer from the same trouble for 307. What exactly is its name mentioned on the Internet? I want to get the equivalent pattern of this foil, I don't like carbon

It is hard to find the originals and you pay a salty fee for this job than the normal foil fee.For the original tapes. I also think that if there are such shops around you, it is possible to apply in a sunny weather.If you have a hand in practice, you can apply it in a sunny weather. When I opened the subject, more knowledgeable friends also gave similar answers. First, make a test by pulling foil on the original tapes.

Mr. Samet, how do I do this dismantling? As you know, the original tapes are under the glass wick.

For example, I would say for 206, it is similar in 307. We need to do it again in this way when we are making a new one, to have a longer lasting and original image. If necessary, use a cleaning chemical suitable for this purpose other than water cleaning.

I got the price called the door pole tape 70 * 4 280 TL only material money

Master, I do not know what kind of product you looked at, but you will look as much as you can handle. You will not look for anything of extreme quality, it is better to look at the original bands from the service if you received such a price outside the service. I thought I was shocked when I saw the price, I can't comment :)

[QUOTE = cloudy_tr] I got the price called the door pole tape 70 * 4 280 TL only material money
[/ QUOTE]