206+ door soundproofing result 100% - How To

Friends, everyone has a problem with pejo 206+ door sound insulation complaint. As you know, our vehicles have a door mashlah, there is a worse opening and closing sound than tofaş series. I took the path..If we come to the result, the sound level has become very noticeably noticeable. I could not take much pictures with the phone because my hands were dirty. I had a little increased in my hand, I glued the bottom of the trunk, I will do it for the front hood in the next free time .. I will reduce the sound of the engine to a certain extent. contamination risk has been minimized) 1 adhesive (after you have applied the bituminous tape, you can do some places with aluminum tape because of spreading the sound insulation on it, but I have forgotten to take the doctor glove as I said) and do not forget to take the work of the doctor already. It took a total of 5 hours. The front doors are really hard, but you can finish a single door in maximum 30 minutes. There is a point to be absolutely, we need to remove the plastic on the inner door part of our side rearview mirror. There is a hidden screw in it, or we can break the door when we disassemble the plastic. I made a pitch application in the locking mechanism. When the door is locked, the sound of the slap is slightly reduced. you appeal your apprenticeship on the back doors we have finished the dfs pitch application now it is still easy to paste the sound insulation.) i forgot to take the next version of the rear trunk before the insulation was made, but no insulation in the luggage :)

I did not want to prolong the subject too much ... I will have fine tricks on you in isolation

it will make it sound much nicer to cover the back of these door handles with 2 layers of pitch. merso :) + If there is no problem in the application of bitumen tape, after spreading the sound insulation material, open and close your windows, check if there is any stuck, correct it, if any :)

Did you heat the bituminous material? Is it self-adhesive?

[QUOTE = hLL 206] Did you heat the bituminous material? Is it self-adhesive? [/ QUOTE]

You can't believe it has a self-adhesive and very strong adhesive :)

Thanks for sharing.

The topic has been moved to the How To section.

[QUOTE = n1say] [QUOTE = hLL 206] Did you heat the bituminous material? Is it self-adhesive? [/ QUOTE]

you can't believe it has a sticky and very strong adhesive:) & nbsp;

[/ QUOTE]

Exactly What is it name? I want to buy it too. Thank you.

[QUOTE = hLL 206] [QUOTE = n1say] [QUOTE = hLL 206] Did you heat the bituminous material? Is it self-adhesive? [/ QUOTE]

you can't believe it has a sticky and very strong adhesive:) & nbsp;

[/ QUOTE]

Exactly What is it name? I want to buy it too. Thank you.

[/ QUOTE]

is actually written as bituminous tape. it is used in waterproofing but it performs very well in sound insulation. I bought & nbsp; src = "http://www.suberta.com.tr/swepco/images/specials/ozellikliurun16.jpg" height = "406" width = "606" border = "0" />

I hope I find it here. I will not come to Istanbul for 2 weeks. I'll find it from there. & Nbsp; Thanks. Goodbye quietly now "Approve"

& nbsp;

Well, if you take the materials and quarters, would I do it in my car too. src = "smileys / smiley36.gif" border = "0" alt = "LOL" title = "LOL" />

[QUOTE = Serkan] Good health Teacher, if I take the ingredients and levels, will I do it in my car. "LOL"

& nbsp; Very good I am an apprentice. "LOL"

[/ QUOTE]

let's make the ingredients, my master :) I would say it is enough for me if you buy an apple or orange juice :) I do not have a drink with a drink

Let's see that I have a spare part of the engine in my spare time. one day i think of removing the seats and doing the bottom, but i'm just thinking now :)

I think we're close, I'm sitting in the sun and I can get the ingredients from the Zeytinburnu bauhaus. LOL

I did not have any insulation in my car, I had a material that resembles old glass, yellow yellow, it looked very bad. br>

samet206 2013-08-28 23:18:05

[QUOTE = samet206] health in my hand did not have insulation in my car, I had a material similar to the old owner of the glass, yellow yellow, it looked very bad, I cleaned the insulation material, then I had a quality carpet, I laid it on top of it, I assembled the original black carpet of the floors on the top of it, I have assembled the original black carpet of the floors, it was very cool. I'm thinking of entering :)

[/ QUOTE

tomorrow, I will shoot the finished part of the trunk for you, by the way, I did both the pitch application of the trunk and the application of pitch and sound insulation to the tailgate. I really did not have anything to do with a voice in the back, did we cut a bit of the engine sound okay :)

It was nice work. I also covered the bituel and I used 10mm insulation sponge like you. The sound makes a lot of difference.

I also pulled the inside of the arches outside the door. Reviews

[QUOTE = Buyer] It was nice work. I also covered the bituel and I used 10mm insulation sponge like you. The sound makes a lot of difference.

I also pulled the inside of the arches outside the door.
[/ QUOTE] Thank you for your recommendation

I realized that all of the door clips were rubbery. I wanted to say that I was the direct part of the seat belts if I did not understand them wrong.

wrong? If there is a difference, I will shoot there if I need it, but as I said, I had no complaints about the sound of the vehicle, just that I was getting nervous when the doors were closing. div>

[QUOTE = n1say] Thank you for your

recommendation, I realized that all of the door clips were rubbery, I wanted to say the direct part of the seat belts if I didn't understand them wrong. If there is a difference, I will shoot there if I need it, but as I said, I had no complaints about the sound of the vehicle, just that I was getting nervous when the doors were closing. div> [/ QUOTE]

The engine is very difficult, sir. You have to dismantle the whole console.

I mean the inside of the outer slats, because they are sound systems, they were making a lot of sound.

I couldn't fully understand how the materials used here. I will order online but I could not learn.

08.05.2020 17:36	# 3
Guests
Did you heat the bituminous material? Is it self-adhesive?

08.05.2020 17:36	# 5
Burak
Thanks for sharing. The topic has been moved to the How To section.

08.05.2020 17:36	# 6
Guests
[QUOTE = n1say] [QUOTE = hLL 206] Did you heat the bituminous material? Is it self-adhesive? [/ QUOTE] you can't believe it has a sticky and very strong adhesive:) & nbsp; [/ QUOTE] Exactly What is it name? I want to buy it too. Thank you.

08.05.2020 17:36	# 8
Guests
I hope I find it here. I will not come to Istanbul for 2 weeks. I'll find it from there. & Nbsp; Thanks. Goodbye quietly now & nbsp;

08.05.2020 17:36	# 10
n1say
[QUOTE = Serkan] Good health Teacher, if I take the ingredients and levels, will I do it in my car. & nbsp; Very good I am an apprentice. [/ QUOTE] let's make the ingredients, my master :) I would say it is enough for me if you buy an apple or orange juice :) I do not have a drink with a drink Let's see that I have a spare part of the engine in my spare time. one day i think of removing the seats and doing the bottom, but i'm just thinking now :)

	206+ door soundproofing result 100%
• Homepage » PEUGEOT MODIFIED PLATFORM » How To

08.05.2020 17:36	# 9
Serkan
Well, if you take the materials and quarters, would I do it in my car too. src = "smileys / smiley36.gif" border = "0" alt = "LOL" title = "LOL" />

08.05.2020 17:36	# 11
Serkan
I think we're close, I'm sitting in the sun and I can get the ingredients from the Zeytinburnu bauhaus.

08.05.2020 17:36	# 12
samet206
I did not have any insulation in my car, I had a material that resembles old glass, yellow yellow, it looked very bad. br> samet206 2013-08-28 23:18:05

08.05.2020 17:36	# 13
n1say
[QUOTE = samet206] health in my hand did not have insulation in my car, I had a material similar to the old owner of the glass, yellow yellow, it looked very bad, I cleaned the insulation material, then I had a quality carpet, I laid it on top of it, I assembled the original black carpet of the floors on the top of it, I have assembled the original black carpet of the floors, it was very cool. I'm thinking of entering :) [/ QUOTE tomorrow, I will shoot the finished part of the trunk for you, by the way, I did both the pitch application of the trunk and the application of pitch and sound insulation to the tailgate. I really did not have anything to do with a voice in the back, did we cut a bit of the engine sound okay :)

08.05.2020 17:36	# 14
Alicilik
It was nice work. I also covered the bituel and I used 10mm insulation sponge like you. The sound makes a lot of difference. I also pulled the inside of the arches outside the door. Reviews

08.05.2020 17:36	# 15
n1say
[QUOTE = Buyer] It was nice work. I also covered the bituel and I used 10mm insulation sponge like you. The sound makes a lot of difference. I also pulled the inside of the arches outside the door. [/ QUOTE] Thank you for your recommendation I realized that all of the door clips were rubbery. I wanted to say that I was the direct part of the seat belts if I did not understand them wrong. wrong? If there is a difference, I will shoot there if I need it, but as I said, I had no complaints about the sound of the vehicle, just that I was getting nervous when the doors were closing. div>

08.05.2020 17:36	# 16
Alicilik
[QUOTE = n1say] Thank you for your recommendation, I realized that all of the door clips were rubbery, I wanted to say the direct part of the seat belts if I didn't understand them wrong. If there is a difference, I will shoot there if I need it, but as I said, I had no complaints about the sound of the vehicle, just that I was getting nervous when the doors were closing. div> [/ QUOTE] The engine is very difficult, sir. You have to dismantle the whole console. I mean the inside of the outer slats, because they are sound systems, they were making a lot of sound.

08.05.2020 17:36	# 17
ahmed206
I couldn't fully understand how the materials used here. I will order online but I could not learn.