206 Daytime Running Light (Completed)

I will try this work without removing the grille on the bumper. I bought the led strip, which is different from normal strip smd leds, whose led is much larger than the power led. I will put these leds in two rows, six on top, and 6 led leds. so if you think of a led as a "_"
_ _ _ _ _ _ << this is the left side like this: P buda right >>> _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _
I hope I could tell. my goal is to make 2 top and bottom leds look like 1 single led.
In terms of giving an idea of the size of the LEDs;
top led smd normal led strip bottom will use my led strip


Half meter big led strip led: 12 tl
Black silicone: 5 tl
Ring Wire
Soldering iron
Solder wire
Scar
Electric Band
Cardboard may be required to fill the Grid Range,
Pickpocket etc. I have also determined the materials I will use.
---------------------------

Unfortunately, I did not have time to take pictures during the construction process, I completed it in 2 hours in a hurry. Even halfway, brown places will be painted, cables will be hidden.





emre26 2011-07-21 18:14:40

I think it should continue the line in the headlights. if you have the chance to shape it, let the 1st one come under the drawbar to the left, right at the same angle with the bumper down the corner. 2. si in the same way to the other side.

If it is not necessary for you to show your brother by painting on the grid of the grid I put ??

If you don't have a job, let's do it together.

I hope the guy will come easy, I hope you can do as you wish, but I will ask you how bad the lip looks like it is unfinished? Is that enough for you

I could not find a place for the LEDs: D

[QUOTE = mehmet1965] If you don't have a job, let's do it together experiment

[/ QUOTE] let's do it, we'll meet

[QUOTE = Burak07] buddy, I hope you can do as you wish, but if I ask you, how bad does that lip look like it is unfinished? Is that enough for you [/ QUOTE]
Kanka: D, you read my thought, I went down and looked at this lip. it is right now

I do a flood one after another, but my brothers do you think if I buy them with a 10 amp fuse from the battery and push the button in the cockpit or would I take it directly from the parks ?? how do you think would be suitable?

[QUOTE = EmRe26] [QUOTE = mehmet1965] If you don't have an order, let's do it experiment

[/ QUOTE] let's do it, we'll meet
[/ QUOTE] Okay, let's see every week after 17:30 on Friday, 0506 582 81 99

[QUOTE = Engin Tepe]

I could not find a place for the LEDs: D

[/ QUOTE]

After 2 hours of effort this day, I finished it and fixed it. I came this far, only a little half left. I had a concert this day. I left it halfway: I will make the D cables invisible and paint the brown useless parts of the strip leds with the acetate pen and it will be finished. I'm adding the pictures immediately

[QUOTE = emre26]





[/ QUOTE]

It is very beautiful. Health to your hand.
Do you have the name of the led strip you use? Should I search as a large led bulb led strip?

Thank you, yes, search for the led leds that are big leds, I am not sure, but it may be called drop leds. It's already burning. Only where I bought it, there are 3 leds in the 10cm part, its wider range is slightly cheaper, mine has 6 leds like mine, closer to each other. You can get it according to your taste or your project.

Can I tell you something. Nice thought. But as far as I see, this is not for the outside environment of the product you have used. Besides, there is no silicon. This is a water circuit, short circuit is broken, I think you chose the wrong product ... the cecol 2011-07-21 08:57:44

There is no silicone on the brother, it is not clear, don't let the picture fool you. Actually, I did not want to extend it too much.

If the top is silicon, no problem :)) But it looks like it is without silicon ...

you have seen it because it is close-up, brother on top with silicon. Tonight I will take pictures at night.

bro, did you have it?

Well, you only need to pull + - from these leds? It is necessary to draw a cable to the dipped headlights in the daytime running light.