206+ comfort Electric door mirrors

First of all, I respect everyone.

Friends, I have a 2010 model 206+ comfort diesel vehicle. As you know, this tool doesn't have any feature. The door mirrors are adjusted internally like the 86 model hawk, there is no trunk lighting lamp, no computer, because you can't even see the outside heat, the air conditioner is manual, there is no torpedo lighting, no rear seat head restraints etc. etc.

After I got the car, I had the first headrest. I also bought an original torpedo chrome plating kit from Belgium and got it installed. I couldn't do anything else to the service :)

However, a year later, sportium and ENVY appeared on the market. Now there are electric mirrors, luggage lighting, leather steering wheel and so on. Of course I regret that I did not expect.

I am wondering if it is possible to install ENVY electric mirror on my vehicle first. Just a mirror would be enough. I guess peugeot was very stingy and did not install the electric installation comforta. The service is not mounted, he said, he took it short. He says even a lamp is not attached to the trunk.

I am waiting for your valuable help in this regard.

Thanks

For the trunk lamp, I can say that the trunk lighting problem can be solved by connecting a luminaire sold in the market, which is generally used in license plate lighting, to the ceiling lamp. The electric mirror is done by pulling the power line & lines into the door, changing the door pendulum, installing new mirrors and controllers, etc. But the costly labor is a bit of a challenge. If the transition from the doors to the vehicle body is in the vehicle and there is no room for the extra equipment you want in this socket, a wiring is made that is not original during the transition to the door and will cause problems in time.

Serhun bey, thank you for your answer. Because I do not think there will be a change in the door sponge between 206+ confort and 206+ envy because everything looks the same. I just don't know if the line is towed. If Peugeot pulled the line there so that an electric mirror could be attached during production, I would expect him to expect something like this from the peuget because even the trunk was solved by installing plumbing ... How much will affect the cost of the car.

I don't understand much, but I think it's also receiving signals from the brain for electricity because I wanted to have a headlight sensor installed. I went somewhere, they did, but because they couldn't get a signal, they made it hurt with the button, and when the headlights turned on, the automatic interior panel indicator lights were not lit in the dark, so it was necessary to turn on the headlights at night again. The man tried hard, but he could not get electricity from the lighter. So I got it ripped off :)

To me, when I go to the peugeot service, this kind of thing should be possible, but unfortunately they do not. I bought the car from Tekoto, but when the service was disgrace and when the customer turned around, I started to take him to Görala because the service personnel were trying to make fun of them. It's relatively better there, but they can't even bring the pieces I want, just how it works.

In a place like Ankara, there are masters of Citroen Citroen in the industry site, which I believe is more efficient in this kind of subjects. It's not hard to make the engine-tuned mirror. you need to find it to be costly.

Dinoco 2011-04-02 12:55:10

I think they couldn't plug in the rain and headlight sensor, so I think it is 150 TL, and it is very useful in the industry. I have been instrumental in attaching a few of my friends' spouses to 206. Dinoco 2011-04-02 12:58:18

If there is no problem for the mirror joystic, there will be no problem in the sponge, yes, in general, the installation of some places is ready, but we cannot say that we are ready for every vehicle.

Thank you for the information you provided. I will examine the forum better.

I bought the car 0 and I didn't want to take it to the industry. Like the original, I wanted to hang on the roof :) but I think I wanted a lot.

My first vehicle was in high school 1 1982 model ford granada 2.8 ghia. I started with such a tool and of course I wasn't leaving the industries of Ankara at that time. I had everything done by modified rectification with an enthusiasm of youth :)

But I know what it means to take 0 vehicles to the industry. He cuts the cable and connects that cable, which had happened in this case of the persensor.

I guess the most logical thing would be to swap the car this year and replace it with a 207 or 308 :)

Thank you Serhun, I have never thought of buying such a product. I think it will work immediately.

Since I love the equipped vehicle, I do the deficiencies myself.

I thought the mirror and glass buttons were replaced in the door sponge, there was a mess from it, sorry, but if you want we will remove the sponge

In 2005 model, there were motor installations in aria: D I have never seen the inside of the + s. The mirror adjustment arm has a look at it. you can ask the sponsor efeden in the mirrors

Hello to everyone.

My friend is not equipped with electric mirror in the vehicle. can pull out the whirling whirling, but who will you get

[QUOTE = ertugrulll] Hi Everyone. [/ QUOTE]

I do not know the name of the place, but continue from Bağdat Avenue, which goes from the bunch to the ostim. Before coming to Ostim, there is AtiSan intersection from there, and there is a service of Pejo. There is a service in there. Star is behind the industry immediately

[QUOTE = spearo] my friend is not equipped with power mirror in the vehicle. can pull out the seduced whirling but who will you get [/ QUOTE]

If there is material, I will do it

cable pull workmanship completely from the mirror plus mirror controlled glass buttons to 2 doors