206 com2000 signal arm repair

The product I bought came from China in these 15 days

First of all, if your hand is not susceptible, I say never get infected. Actually it is not difficult but it requires attention.

First of all, this is our problematic part: actually, the arm is sold separately, but there are 10 types of arms, so I went to change this part.

I removed the airbag and steering wheel. I used torx 50 star allen to remove the steering wheel.

I thoroughly taped the airbag wrap before removing the com200 unit . this point is very important !!!!!

Especially the steering was very successful.

I found someone who was doing airbag bandage on the internet and told the situation. I said, let me bring the piece to you, I'll give you the change fee. I also posted the change video. The man said, I can't do it. However, it removes the same parts for airbag wrap and does more complicated work.

So everyone in the industry you will understand is full. The china of the hand determines what the problem is, produces the plastic part and sells it to the whole world, ours will not be repaired, it will change completely. If you see that piece, it's like a plastic ballpoint pen back.

what is the name of the material you buy from china

I'll be glad, if you help me

thanks in advance

He comes out when he searches.

These are the links.

Which key teacher did not you understand?

Com 2000 headlight arm, signal arm, wiper arm, tape control, speed stabilizer arm, if any, and the general name of the unit where airbag windings are combined, teacher. My only signal arm was faulty. The plastic in it melted over time.

You probably ask the button on the end of the signal lever. Nothing happens to the pressure in my vehicle. But as far as I know, that button changes information as it presses on those with a 3-line display.

Com 2000 headlight arm, signal arm, wiper arm, tape control, speed stabilizer arm, if any, and the general name of the unit where airbag windings are combined, teacher. My only signal arm was faulty. The plastic in it melted over time.

You probably ask the button on the end of the signal lever. Nothing happens to the pressure in my vehicle. But as far as I know, that button changes information as it presses on those with a 3-line display.

thanks my master

https://www.aliexpress.com/item/white-loose-ındicator-stalk-switch-repair-plunger-for-dav-comm2000-for-citroen-loosen-rod-screw-connection/32951199009.html

Note: When you enter the link, delete the "% C2% A0" section at the end.

https://www.aliexpress.com/item/White-Loose-Indicator-Stalk-Switch-Repair-Plunger-for-DAV-COMM2000-for-Citroen-Loosen-Rod-Screw-Connection/32951199009.html ;

Your link does not open either.

https://www.aliexpress.com/item/White-Loose-Indicator-Stalk-Switch-Repair-Plunger-for-DAV-COMM2000-for-Citroen-Loosen-Rod-Screw-Connection/32951199009.html ;

Your link does not open either.

Sir, at the end of the forum link ";" I think he adds, I don't understand. When you enter the link, delete the "% C2% A0" section after the html section at the end and open it.

If the com2000 brand is Dav, you need to take the white one, if it is delphi, the black one in the last photo. In some places, those who cannot find the part find solutions by simply replacing the spring. But I think it makes more sense to change the plastic after removing and installing it.

Yes, the section with the headlight turn signal lever and the airbag coil in peugeot vehicles is called comm2000. I think the top models are mentioned as comm2002. The same product, although the name is different.