|
|
|
|
206 Ceiling Molding Painting Lecture (Illustrated) |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 206 | |
| 08.05.2020 15:59 | # 1 |
 werty |
|
|
Stage 1: The ceiling slats are gently removed. There are 2 overlapping clips in the place where the cover of the luggage cover ends, there are 2 clips in the place where my glass ends, and you can get a new glass after 8 years.    Stage 2: The removed walls are beautifully washed and then sanded with the finest sandpaper, so that the paint is slightly lifted.   Stage 3: After the laths are sanded, they are wiped with a wet cloth, and then the rubber parts are covered with masking tape at the edges of the laths and the painting process is started. I suggest you to throw 3 or 4 layers.   Stage 4 Conclusion: Attention should be paid while the laths are being attached. Gently place the clips on the seat.    Note: In the pictures, there are fluctuations in the paint, all of the fluctuations are gone when the paint dries. The cost of this process is 13 lira and it can be completed in 45 minutes. I hope I could help. Good luck with |
|
| 08.05.2020 15:59 | # 2 |
 F-Eren |
|
|
I didn't know what to say, it seemed strange to paint them :) Thank you for your health.
|
|
| 08.05.2020 15:59 | # 3 |
| werty |
|
|
The reason for painting is the water that peels peel off at the time and the metal underneath begins to appear. The color is fading. When the same color is painted on the matte black, it becomes zero.
|
|
| 08.05.2020 15:59 | # 4 |
 ibrahim YILDIZAK |
|
|
I couldn't open the pictures
|
|
| 08.05.2020 15:59 | # 5 |
 Guests |
|
|
man, I think the health of your work is such an application but first I need to complete the door isolations
|
|
| 08.05.2020 15:59 | # 6 |
 mon |
|
|
Good health.
|
|
| 08.05.2020 15:59 | # 7 |
 tigerland |
|
|
nice work .. labor here :))
|
|
| 08.05.2020 15:59 | # 8 |
| Guests |
|
|
Good health to you, nice. Mine was opened slightly, just like yours. I will apply it soon. Carbon coating can also be made.
|
|
| 08.05.2020 15:59 | # 9 |
 Ozgur |
|
|
Yeah, I thought about carbon coating. really useful sharing. you have touched a good point, good health |
|
| 08.05.2020 15:59 | # 10 |
| werty |
|
|
friends, I thought of carbon coating, but if carbon coating is taken as a single piece, it takes a long piece, it is expensive, if it is taken short, it becomes an attachment.
|
|
| 08.05.2020 15:59 | # 11 |
| Guests |
|
|
There will be at least 3 additional. But I think it doesn't open the tips if it is inserted under it. I have carbon, but it is short, if I get to work it will have 5 joints so I will try it next month. Isn't there a way to disassemble the front without breaking it?
|
|
| 08.05.2020 15:59 | # 12 |
| werty |
|
|
[QUOTE = Berkay] There will be at least 3 attachments. But I think it doesn't open the tips if it is inserted under it. I have carbon, but it is short, if I get to work it will have 5 joints so I will try it next month. Isn't there a way to disassemble the front without breaking it? [/ QUOTE] first, let me know the presentation, there is no damage to the bolt, there is a segment that squeezes it between the bolt and the bonnet, it breaks, I broke it. the cheetah
|
|
| 08.05.2020 15:59 | # 13 |
 masoksian |
|
|
pictures are not visible links are dead new?
|
|
| 15.09.2020 17:03 | # 14 |
| Luqaa |
|
|
Right now, exactly what I need, but the pictures are not visible. Should I upload it again?
|
|