206 brake pad sounds |
|
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 |
08.05.2020 14:18 | # 1 |
Guests | |
|
08.05.2020 14:18 | # 2 |
peugeotefe | |
What brand of brake pads did you have?
|
08.05.2020 14:18 | # 3 |
arifziyaar | |
the same problem is with me. 2006 model mine is mine .. at low speeds while walking through the streets, the skin is creaking, it stops when it touches the brake .. 30-30 seconds later it starts again .. Try not to hear that there is nothing left to do: P
|
08.05.2020 14:18 | # 4 |
Guests | |
I had a Bosch brand.
|
08.05.2020 14:18 | # 5 |
Guests | |
[QUOTE = aza1980] I have the same problem with me. The 2006 model is mine .. it stops when touching the brakes at low speeds when it is going on between the streets ... It starts again after 30-40 seconds .. I took it to the mechanic. He said there may be dust on the lining .. try not to hear anything left to do: P [/ QUOTE] A very annoying sound. I can't come from ignoring. I hope there is a solution.
|
08.05.2020 14:18 | # 6 |
Melih | |
Sometime he was coming from my car, I never did anything, no more
|
08.05.2020 14:18 | # 7 |
ibrahim YILDIZAK | |
I started yesterday, took me today, the pads are finished, changed, no problem
|
08.05.2020 14:18 | # 8 |
Kifanhom | |
shave discs If there is not that much meat, take a set of discs from 40tlx2
|
08.05.2020 14:18 | # 9 |
l3looDy | |
[QUOTE =] Hello friends. My 99 model 206 XS vehicle is in motion while it comes out of its linings. I changed the pads and the sound was not cut again. Pressing the brake stops sound. The condition of the disks is also good. Has anyone encountered such a problem? [/ QUOTE] 1st pad lining cleaner spray + cloth you need. First of all, the discs should not be heated because they do not evaporate when spraying. First, keep pressurized water and dust, clean the discs with the help of a cloth. There is enough space to fit your hand. but if it still continues, there is nothing to do, new discs come :)
|
08.05.2020 14:18 | # 10 |
samet206 | |
Your teacher, you say that situation is good from the discs, but all the reasons you count are positive, there is only one thing that will make that sound. The same problem disappeared when tapping. |
08.05.2020 14:18 | # 11 |
mustafa_nalcacioglu | |
Hello, the same problem has been with me. There are protrusions caused by the abrasion in the brake discs. When these are taken to the same level with the surface of the disc touching the pad without touching too deeply, the sound is interrupted.
|
08.05.2020 14:18 | # 12 |
hakan38 | |
Master has the same problem with me and the vehicle is a 2010 model. It started after changing the lining. they weren't wearing the clips. they put them on, they turned the distillery, but still weird sounds from the front
|