206 bow recommended?

hello friends last week I bought 206 wheels, but since the car's springs are original, it is very airborne, what should I do to lower the car a little bit, would it be enough if I take the bow? And would the car go through that? Turgay_66 2013-11-06 15:46:36

Do not choose a brand other than EIBACH. You should also have a sporty shock absorber (steering wheel, axle, swing, undercarriage so that it does not deteriorate). It passes the inspection as `` vehicle close to the ground '' with a slight defect. dogan106 2013-11-06 15:59:10

Is it mandatory to wear Eibach brand spring or sporty shock absorber? You said that the steering wheel, axle, swing, undercarriage should not be disrupted. But I have never heard or seen such a problem.

I will not drop it too much. It will be a little bit between the tire and the windshield.

[QUOTE = cagdascicen] Is it mandatory to wear Eibach brand bow okay sporty shock absorber? You said that the steering wheel, axle, swing, undercarriage should not be disrupted. But I have never heard or seen such a problem. [/ QUOTE] dogan106 2013-11-06 16:59:08

[QUOTE = Turgay_66] I'm not going to drop too much, just a little bit of space between the tire and the windshield.

I understand, hojam springs are just hanging in front of them.

[QUOTE = Turgay_66] I understand, is it true that the springs just hang in front of me, did I have a bow in the 206?

Where are you 206? :)

There is 206 torsion on the back. If a 3.5mm spring is installed, 1 outer from the rear torsion is sufficient. Birtan ÇÖTELİ 2013-11-06 18:08:02

[QUOTE = Birtan ÇÖTELİ] 206 there is torsion on the back. [/ QUOTE] I understand that you said that it is enough to drop a tooth of the back torsion, would you mind if they could do it in the industry? What is the price of eibach springs?

[QUOTE = Turgay_66] [QUOTE = Birtan ÇÖTELİ] 206 there is torsion on the back. [/ QUOTE] I understand that you said that it is enough to drop a tooth of the back torsion, would you mind if they could do it in the industry? How much does eibach springs cost? [/ QUOTE] Birtan ÇÖTELİ 2013-11-06 19:39:38

[QUOTE = Birtan ÇÖTELİ] [QUOTE = Turgay_66] [QUOTE = Birtan ÇÖTELİ] 206 There is torsion on the back. [/ QUOTE] I understand that you said that it is enough to drop a tooth of the back torsion, would you mind if they could do it in the industry? How much does eibach springs cost? [/ QUOTE] [/ QUOTE] only bow swap enthusiasm is absent, my front doesn't yawn at all.

actual

I have never heard of complaints from Eibach and Vogtland users. FK is not recommended

I had a 16 '' rim, my car was a suv you know with goodness :) :) one of my brothers gave the eibach pro kit bow as a gift.To find out which code should I look at or what to look for, is it suitable for my car? More 206 models are written. How many cm does it say that my student?

[QUOTE = Birtan ÇÖTELİ] I had a 16 '' wheel rim that I knew today, my car was a suv you know :) :) Eibach pro kit bow was given to an older brother. He writes a few more 206 models in his mortar. How many cm does he say? How can my student do it?

Thank you, I will find a master who will follow the spring, then I will share the picture.