206 automatic gears - 206

While using, it protects with knock. When it is protected, it fixes itself to 3rd gear. Therefore, since the torque convector is not activated, it misses back on the slope. On straight road, it is not thrown forward when you take your foot off the brake. If the vehicle is protected, if you force it on slopes or something, you will damage the pads. Stop and run again without taking as long as possible.

Let's come to your problem. Such problems usually do due to solenoid failure. It resolves when the solenoid and oil change.

But to say something definite, it is necessary to connect it to the device and look at the pressure values.

talip206 2019-03-16 16:47:20

08.05.2020 21:11	# 1
cheff68
Hi The 2005 model 206 XT automatic shifts the gear on the straight road late and runs back when it stops on the ramp. What can be the problem when it stops and runs out? can you recommend a good master, thanks ...

	206 automatic gears
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206

08.05.2020 21:11	# 2
talip206
While using, it protects with knock. When it is protected, it fixes itself to 3rd gear. Therefore, since the torque convector is not activated, it misses back on the slope. On straight road, it is not thrown forward when you take your foot off the brake. If the vehicle is protected, if you force it on slopes or something, you will damage the pads. Stop and run again without taking as long as possible. Let's come to your problem. Such problems usually do due to solenoid failure. It resolves when the solenoid and oil change. But to say something definite, it is necessary to connect it to the device and look at the pressure values. talip206 2019-03-16 16:47:20