206 Automatic Gear Display Panel

Hello, I have 206 automatic cars, as seen in the pictures, the middle part of the gear panel indicator has started to take a different color. I tried to remove this with a few oil cleaners and ordinary cleaners, but the result is still the same. How can I find a solution to this, is it a part that can be removed? can i change it Thanks

If you want to investigate when it is called automatic gear pad or control cover. Alternatively, you can take the template of this with advertisers and prepare it as a sticker.

I did it myself, I bought a strong red sticker from the signer, then I removed the black-colored numbers and letters, removed the protection around it, fixed it with a utility knife and a small ruler, then cut the numbers and letters, thank you, the sign-maker did not charge me a fee, but it was worth it.

this panel is sold but not only the top part is sold completely and it is quite expensive. You can make a nice Insulation and paint it with Spray paint. Then you can get the letters from the advertiser and paste them. or as our friend says, you can use full printed adhesive paper.

In brands like würth, there may be products that will clean surfaces like this.

I have tried a few of these kinds of surface cleaners, but it did not, as a result, it seems that I will try the methods recommended by our friends and friends, otherwise it would be an expensive and unnecessary expense. Thank you for the information you provided

mine looked exactly like this, I had to remove the nails and paint them, I put them on sticker letters.

First of all, everyone.

[QUOTE = victory19] First of all, hello to everyone. [/ QUOTE]
unfortunately, there is only lighting in the indicator section, there is no lighting in the section where the gear is

Wd40 may be the solution to the problem. Also, if you are going to make a sticker, you should first sandpaper etc. Remove rust and paste with paste.