206 antenna |
|
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 |
08.05.2020 17:58 | # 1 |
sulocan_5 | |
|
08.05.2020 17:58 | # 2 |
TuNeR_32 | |
Zero 10 TL change something, you will try more when you drop the silicone adhesive into the body.
|
08.05.2020 17:58 | # 3 |
Alicilik | |
The lower screw part was fluttered in service. Somebody had pulled mine off just like he was silicone, so that I wouldn't let it water. I took it immediately, solved the previous one with 10 keys and installed a new one.
|
08.05.2020 17:58 | # 4 |
samet206 | |
I am not a fan of sticking to the bodywork, the new one is not very much, but you can buy and install it, but if you say I need to paste it, you have 404 Plastic steel mixture adhesive is very strong. |
08.05.2020 17:58 | # 5 |
sulocan_5 | |
First of all, thank you. Okay, I'll buy a new one, but I don't understand where and how to disassemble it.
|
08.05.2020 17:58 | # 6 |
Alicilik | |
Remove the ceiling lamp, Remove the plastic to which the ceiling light is attached Loosen and remove the screw with a 10-key, only the antenna wire remains assemble your new purchase in the same way |
08.05.2020 17:58 | # 7 |
sulocan_5 | |
Thank you very much. Do I need to buy it completely or is the bottom part separated?
|
08.05.2020 17:58 | # 8 |
Alicilik | |
That part is sold only. |
08.05.2020 17:58 | # 9 |
sulocan_5 | |
thanks
|
08.05.2020 17:58 | # 10 |
sulocan_5 | |
Finally, how will the dib and the other part (the long part) be separated?
|
08.05.2020 17:58 | # 11 |
Alicilik | |
When that part is screwed, it must be removed |
08.05.2020 17:58 | # 12 |
sulocan_5 | |
thanks.
|