|
|
|
|
206 AL4 Transmission Question |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 10.02.2021 17:00 | # 1 |
 Emresertbas |
|
|
I will ask the net without further ado Vehicle 206 2003 xt automatic 1.4 engine On a hill, the gear will go from first gear to 4000 revs It needs to come and then it is a slight knock and it is corrected. There is no problem on the flat road or downhill or light ramp, only when you stop and go on a steep slope, it does this problem in 1st gear.
|
|
| 11.02.2021 16:20 | # 2 |
| Emresertbas |
|
|
You did not write CVP, but I went to the gearbox, I went to the computer and connected it to the computer, the solenoid gave a walf error and the pressure sensor error. The solenoids have changed, there is no knock, etc. If it continues, we will change the pressure bar, what I pulled from this AL4, but I am not afraid of my car before I get it done.
|
|
| 12.02.2021 10:55 | # 3 |
 talip206 |
|
|
Late gear shifting on the slope is normal, sir. Otherwise, the vehicle would change early and fainted. In fact, there is a situation like this, I think it is a software situation. When he goes up the slope and moves on a straight road, he changes gear late on the first change. I think he thinks he's going uphill.
Since Al4 is an old type gearbox, these things are considered normal now.
|
|
| 12.02.2021 12:32 | # 4 |
| Emresertbas |
|
|
Thank you the gearbox said the same thing
|
|
