206 Airbag light (Solved)

Find the cables that come to the seat belt and check their sockets. You can go to a good electronics shop and have their cables checked.

It is really hard to find a master like a man. Everyone is after challenging rather than solving the problem. They say there is no cable out and they are playing. Interestingly it still goes out when the air gets hot. Most likely, sockets. Of course it is likely to have a seat belt failure. I am thinking of cleaning with contact cleaner at a convenient time. I am an electrical-electronics engineer myself. My worst complete entry.
luridline 2018-02-02 15:45:59

Friends, this light is on, when we connect it to the computer, it gives the left seat belt failure. I wonder if I try the sockets under this steering wheel? There is something that I am very curious about, in 2003 model 206, is there a socket or cable in the place where the left seat belt is wrapped at the bottom? This is about airbagle? editdat a>

There is also 2006 x design, you can flex the plastic on the pole from below and insert your hand and check it.
My trouble is recovering when the weather is hot, possibly a malfunction of the spool or sensor malfunction

I solved the same problem by chance while removing the door and interior trims and cleaning them while playing with the left and right seat belt height adjustments. When I said clean, I started the car, I looked, the airbag lamp was extinguished :) 1 day ago, the master said that the problem was solved when the airbag winding on the steering wheel changed it :) kaan206 2019-04-29 23:26: 54

Usually it burns on me too, sometimes I stop the car and put my hand under the driver's or passenger seat, there are airbag sockets, I play it back and forth right and back, if I can tighten it, I turn the contact, the light goes out, if it does not go out, I do the same operation again, it goes out again :)

I did the same right now, it's okay thanks