206 A place with continuous electricity

Hello friends. In the car, I will install 2 lamps on the front bumper and connect it to a button. I need a place with constant electricity. where do I connect the easiest? So where do I get the electricity for the lamps? If possible, I would appreciate if you know somewhere close to the headlights and show them with pictures. Thank you all in advance.

[QUOTE = murat20021978] Hello friends. In the car, I will install 2 lamps on the front bumper and connect it to a button. I need a place with constant electricity. where do I connect the easiest? So where do I get the electricity for the lamps? If possible, I would appreciate if you know somewhere close to the headlights and show them with pictures. Thank you all in advance. [/ QUOTE]

2 wires are required for the lamp to operate, with plus and minus. It's easy because you can get it directly from the chassis. You will have to bring the plus pole from the lamp you will place for the button (switch) to the console or wherever you want to place it. In this case, the only question is where you can bring the plus pole to the switch. I think that you can take it from tape, or directly from the aquarium. I hope I could help.
Koliva 2011-04-06 13:32:34

after such electrical connections, the malfunction light may burn. How do you know the light you swap? how many watts of lamp ??? If there is anything that will draw too much current, the place where it will connect will be important. Maybe it will be necessary to get electricity from the aquarium. it will be necessary to connect it to the role, etc. vs etc. :))

Thank you for the information :) But I think I want to ask was misunderstood. What I need is exactly which cable should I pull? for example a place in the Insurance panel, for example? or a region under the steering wheel, but exactly where and from which cable can I get a Positive (+): D

the easiest one is to go to an electrician ... now you do it yourself, it causes a problem in the car, which will cost you a lot of salty ... you give the electrician 20-30 TL ok :) :) :)) :)

[QUOTE = murat20021978] Thank you for the information :) But I guess I wanted to ask was misunderstood. What I need is exactly which cable should I pull? for example a place in the Insurance panel, for example? or a region under the steering wheel, but exactly where and from which cable can I get a Positive (+): D [/ QUOTE]

Thanks. However, I could not explain again. Anyway, when I do it and put your picture, I will explain it: D

Yes, I finally did the Led Lighting and it was very stylish on the bumper. Hand labor from top to bottom. unfortunately I couldn't photograph the construction phase. When I take a picture, I will immediately put it on the site.

We are waiting for the pictures of the application you made.

Actually, I already did it but I couldn't upload it, but I only have time.

Left Part murat20021978 2011-05-24 17:01:51

10, out of 10. Where did you connect the + (positive) pole? And if you took a photo of the unburned version. how does it look?

the first picture is unburned but I guess you couldn't see it completely :) I took the bidet in the evening, the black floor was not obvious from the votes :) + I got the pole from the fuse panel, I think it was the insurance number 20, I do not remember the exact number, but luggage etc. Here is the fuse that controls the lighting. If I take a new picture (during the day) I will add it here.

I wonder how the single picture of the lamps is so beautiful.

Well, I have to take care of my brother, who is super, as he sees such things.

Easy to remove the lamp. To the bumper with a screw. But changing is a bit troublesome. There are 9 LEDs in total, 3 of which are inside. If it explodes, I'll get a little :)

good-bye good-bye unspoken place number ten