Peugeot Forums - Peugeot Fan Club

206 1st gear problem

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 18:04 # 1
Turgay_66
Friends, I can't shift to 1st gear without stopping. What could be the problem? Turgay_66 2013-11-13 15:02:56
08.05.2020 18:04 # 2
samet206
A normal situation is the case in most of the 206 and many vehicles, so it is supposed to be a situation arising from the transmission mechanism of the 206's. The first gear is the take-off gear, it doesn't make sense to just stop, but I am very stylish about the same subject, it is very hard on the traffic jam, but there is not much to do.
08.05.2020 18:04 # 3
ufuk91
Let's say that the vehicle does not shift to 1st gear or not, without stopping, it is normal to be very difficult. Why go into 1st gear without stopping?
08.05.2020 18:04 # 4
moschino
Just like a normal thing or a general problem or even a reverse gear from time to time ...
08.05.2020 18:04 # 5
mev347
The reverse gear is problematic in the 206. It doesn't shift into gear when the gear is not seated.
08.05.2020 18:04 # 6
Bugra
Yes, I agree with friends, I know that all cars are in the compartment. It is difficult to shift to 1st gear without stopping the vehicle. it is difficult to divide in my 206 food
08.05.2020 18:04 # 7
TuNeR_32
In all cars, there is no 1st gear problem.
08.05.2020 18:04 # 8
samet206
Indeed, not all vehicles have this problem, some vehicles allow less when something is in motion. To shift to 1st gear. I also agree to the reverse gear event. There is a shortage of not being able to engage the 1st gear without stopping, at least sometimes it happens to me, sometimes it is between stopping and stopping with 2, and stacking with 2, it is necessary to throw it into the 1st gear, it is sometimes annoying, sometimes it is annoying from behind. If the horn sounds, then of course I go a little slow and I want to see the face of the car that presses the horn when it razes the man well and lays down, but it never happened :)
08.05.2020 18:04 # 9
ahmed206
If our cars, not people, entered this forum, the title of this title: drivers who try to put it on the way to the road would probably have a problem :)
It is difficult to put on 1st gear. And I think this is not a problem. It was probably made to prevent accidental 1st gear shifting at high speeds. If you think you accidentally throw it at 5, it's okay, but who knows what happens when you put it on 50km speed and 1 at above and take your foot off the clutch ...
If I need too much, I push it gently without waiting, and wait in a second or two.

In the meantime, there is a problem with my 206, not being able to shift into reverse easily. As you said, I can move it a little bit and attach it.
08.05.2020 18:04 # 10
bjkamil
I thought I had a problem with my vehicle. I continue to vibrate in 2nd gear because the 1st gear is going hard :)
08.05.2020 18:04 # 11
Turgay_66
some friends got me wrong, I am not trying to shift to 1 when I go with 50, when we are in congested traffic, for example, we slowed down when we were 50, our speed fell to 10, this is what I want to explain. Turgay_66 2013-11-14 14:51:57
08.05.2020 18:04 # 12
Bugra
[QUOTE = Turgay_66] some friends got me wrong, I do not try to shift to 1 when I go with 50, when we are in congested traffic, we slowed down when we were 50, 10 fell, I don't want to cycle if I continue with 2nd gear, this is what I want to tell. [/ QUOTE]

Okay, your friends and when I say it, if you are on the move a little bit, it is difficult to shift to 1 gear even at a speed of 5-10 km. Smile
08.05.2020 18:04 # 13
Turgay_66
I understand, teacher thank you :)
08.05.2020 18:04 # 14
Turgay_66
I understand, thank you, teacher :) sorry I wrote 2 times :) Turgay_66 2013-11-14 14:30:08
08.05.2020 18:04 # 15
ahmed206
Smile It was an example.
08.05.2020 18:04 # 16
Turgay_66
[QUOTE = I anon] Smile It was an example of my teacher, don't be angry [/ QUOTE]
08.05.2020 18:04 # 17
kuscu38
Have you ever noticed that there is a crowing in the arc? If the wheel sounds as if the ball has been raised, try to get up at the 3rd gear. If there is no problem, there are two possibilities.
08.05.2020 18:04 # 18
kuscu38
[QUOTE = Buğra] [QUOTE = Turgay_66] some friends got me wrong, I do not try to shift to 1 when I go with 50, when I am in congested traffic, for example, we slowed down when I was 50, 10 fell, I do not turn around if I continue with 2nd gear I want to explain this. [/ QUOTE]

Okay, your friends and when I say it, if you are on the move a little bit, it is difficult to shift to 1 gear even at a speed of 5-10 km. Smile
[/ QUOTE]

just like when my teacher is close to the stopping point
08.05.2020 18:04 # 19
Turgay_66
[QUOTE = kuscu38] If you have any attention, if there is a crowing in the back, if the ball makes a sound like the ball is raised, try to get up in the 3rd gear if there is no problem, there is two possibilities or the pressure is about to end or the gearbox gear is about to be lifted. [/ QUOTE] ball sound No, hodja.
08.05.2020 18:04 # 20
sezar206
it also passes without stopping, but you have to slow down quite a bit. The vehicle does not pass without stopping to the engine and transmission 1 to the first time in the morning, but there is no problem when it gets hot. nevertheless, it will be more comfortable if you slow down quite a bit. I can wear it without stopping at a speed of 5 - 7 km.
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”