206+ 1.4 hdi not found problem!! Emergency aid

While the vehicle is driving, it suddenly cuts off the gas, it says antipoltion fault on the screen, then it returns to normal. There is a momentary error, then the error does not continue and the engine light does not come on. After a while, besides this error, the idling stop problem started. It does not give the error in a special situation, it can give it in every cycle and in every condition. Sometimes it does not give an error for two days, sometimes it gives an error 2 times in 10 km. I changed the fuel filter because it wrote Antipolition fault before, it didn't get better. I had a week's vacation and I thought about getting the car done in my hometown Ankara.

On Tuesday, a friend in Şaşmaz had the device connected to the device and it showed the p0606 error code. He was a familiar turbo, because there was no problem with the turbo, he deleted the error and said it was electronic. On the way home, the car failed again. I took it to the Göral Authorized Service on Wednesday morning and left it. I thought that the authorized service could clearly detect the error. The next day, they called the service and said that they connected it to the device, they did a road test, but there was no malfunction. Then I went back to Şaşmaz again and went to a friend or two of my friends and asked what we could do. Because AUTHORIZED SERVICE couldn't find my fault, it's up to the masters.

My friend directed me to someone he knows because he is a truck master. It was said to be a catalyst. The exhauster we went to for the catalyst noticed that the turbo air inlet hose was torn. It's pissing me off that no one noticed until now, of course, let me make a note of that. Turbo inlet hose was changed, catalyst was cleaned and installed. Two hours later, the same malfunctions started again. Again, we went to a pejoc master. The air flow meter cleaned it, tried it, didn't do it for half an hour. We left the master, the mistake was repeated. The next day, a friend of my father recommended an electrician, so we went to him and we had him connected to the device. It gave error P0606 again. He directed me to the private Citroen Peugeot service. The guy here went straight into their system and said it was a brain. Still, he said that it could be from the electrical installation and he did not give a guarantee, he just said that if it gives the same fault within a week, we will replace the old brain, and I will give you your money back, except for the labor. I accepted the fee of 2 thousand liras, but he could not assign the software of my vehicle to the brains in his own hands. I don't have a suitable brain right now, the exiters only want 3500 for the brain, and I can't give any guarantees, let's not do it now, I'll get a brain, you'll go to Istanbul, we'll do it the next time you come," he said. The master made brains for 3 vehicles that didn't work while I was there, and they all started. He collected the vehicle that came with the tow truck in an hour. He gave confidence, but he could not say anything clear. I was left alone with this problem of the car. I need to return to Istanbul.

Friends, has anyone had such a problem? What do you recommend? Do you have a reliable master in Istanbul Anatolian Side? I need any help and ideas.

Thanks in advance.

If the brain malfunction is confirmed, there is a small industry close to the center of Ümraniye, there is a brain engineer and an electronics master.

blowing auto electric Bekir master. He found my unresolved problem. He is also a well-equipped person.

More, I deal with the electronic problems of the vehicles, I have my own place, if you are available, please come to our service with your vehicle, we will check your vehicle's breakdown and find a solution for you. Istanbul Ümraniye dudullu osb kadosan auto industry site S Blok no 14 S&M automotive

If you want to come, you can reply and contact me here, I wish you a good day :)