206+ 1.4 Hdi Abs Problem - 206+

Hello,

I bought 2011 Model 206+ 1.4 HDi Comfort 3 weeks ago. The routine abs lamp burning in Computest went out after 1 day and came back on again. The ABS light has been on ever since. It turns off from time to time, but turns on again during the day. For this reason, the vehicle failed the inspection. I made a fault finding and the computer shows 'ABS Circulation Pump Failure'. The master, the minister, has nothing to do with this, said the brain directly. I took it to another master because he took such an attitude without being interested and said that it costs &1000 directly, and he said that the pump was defective. Has anyone encountered such a problem before, and if so, how did they find a solution? I do 150 km a day with the vehicle, and such a breakdown makes me nervous.

Even if there is a master he knows and trusts in Ankara, I am open to advice. It is my first vehicle and I am very satisfied except for this issue, I am waiting for our support, thank you

Hello my friend. I have the same problem. As a result, how did you solve it. I would be glad if you could help me. My vehicle is 2011 envy 1.4 HDI. ABS is flashing according to its head. I had the pump repaired but nothing changed.

Hello, a member of our 207 had a similar problem, it turned out that the problem was caused by the cable and it was repaired at a cost of 100 TL.

ivedikte mas peugeot abdurrahman master

capital industrial site demirkıran peugeot

You can go to either of these.

Hello friends, I'm a mechanic, the same fault you described happened to one of my customers. As I said, I'm a mechanic, we'll take care of all your problems, if you want to contact me, reply to my message, I can help.

Greetings again,

I noticed the messages quite late, but the problem was in the ABS brain. There is ABS's Hakan in Ankara, he made it famous. I haven't had any problems for 7 months. Good forums

31.10.2021 13:49	# 1
muttafi
Hello, I bought 2011 Model 206+ 1.4 HDi Comfort 3 weeks ago. The routine abs lamp burning in Computest went out after 1 day and came back on again. The ABS light has been on ever since. It turns off from time to time, but turns on again during the day. For this reason, the vehicle failed the inspection. I made a fault finding and the computer shows 'ABS Circulation Pump Failure'. The master, the minister, has nothing to do with this, said the brain directly. I took it to another master because he took such an attitude without being interested and said that it costs &1000 directly, and he said that the pump was defective. Has anyone encountered such a problem before, and if so, how did they find a solution? I do 150 km a day with the vehicle, and such a breakdown makes me nervous. Even if there is a master he knows and trusts in Ankara, I am open to advice. It is my first vehicle and I am very satisfied except for this issue, I am waiting for our support, thank you

19.11.2021 10:01	# 3
sonerkyl
Hello, a member of our 207 had a similar problem, it turned out that the problem was caused by the cable and it was repaired at a cost of 100 TL. ivedikte mas peugeot abdurrahman master capital industrial site demirkıran peugeot You can go to either of these.

21.11.2021 01:45	# 4
AdemUsta1
Hello friends, I'm a mechanic, the same fault you described happened to one of my customers. As I said, I'm a mechanic, we'll take care of all your problems, if you want to contact me, reply to my message, I can help.

29.05.2022 20:22	# 5
muttafi
Greetings again, I noticed the messages quite late, but the problem was in the ABS brain. There is ABS's Hakan in Ankara, he made it famous. I haven't had any problems for 7 months. Good forums

	206+ 1.4 Hdi Abs Problem
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206+

17.11.2021 17:12	# 2
Phoney
Hello my friend. I have the same problem. As a result, how did you solve it. I would be glad if you could help me. My vehicle is 2011 envy 1.4 HDI. ABS is flashing according to its head. I had the pump repaired but nothing changed.