|
|
|
|
206 1.6 ignition key failure |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 20:55 | # 1 |
 unalt |
|
|
|
|
| 08.05.2020 20:55 | # 2 |
| bilo131 |
|
|
I saw it randomly while browsing the forum, today I had the same problem. On the highway, I come with the air conditioner on, sometime, I closed the air conditioner and opened the windows.  then I would stop to buy something from the market, as if the ignition key was stuck, I was trying to turn the key inside, it was not turning. I tried to turn the steering wheel with a little bit of steering, this time the vehicle stopped. I don't mind if the air conditioner fan is not working right now.  |
|
| 08.05.2020 20:55 | # 3 |
| unalt |
|
|
The master said that when the contact changes, they all get better, but for some reason I don't believe there will be another problem, fuses or something. Did the car also make a temperature? Has the contact recovered now?
|
|
| 08.05.2020 20:55 | # 4 |
| bilo131 |
|
|
The vehicle did not overheat, everything was normal. Currently, the normal starter is stuck. But let me see, I'm excited now I'm excited  edit: I looked, now the vehicle is running normally, I stop but the fan is not working |
|
| 08.05.2020 20:55 | # 5 |
| bilo131 |
|
|
today the seeds of the hawthorn broke down There are abnormalities in the temperature indicator for several days. The heat was coming up to 110 while climbing uphill and did not descend immediately. Today, when it was 110 degrees again, I looked down to see if the fan was working. the fan was not blowing, but I started the air conditioner, the radiator fan did not work again. Last time I came home, this time, I turn off the ignition of the vehicle, the car does not stop, the idle is changing, I remove the key, but it continues to work. The problem mentioned in the previous comments is probably the contact
|
|
| 08.05.2020 20:55 | # 6 |
| unalt |
|
|
I will renew the contact terminal, ins on Wednesday, I will write the result here, intervene accordingly, I burned you burning 😀 |
|
| 08.05.2020 20:55 | # 7 |
| bilo131 |
|
|
thank you master but i will go tomorrow, i will write if i get it early  we burned, don't let others burn 
|
|
| 08.05.2020 20:55 | # 8 |
| bilo131 |
|
|
yes guys i solved my problem. It happens to friends who can do such a thing. There is a master of Ege automotive İbrahim in the Güngören industrial site. The problem was caused by the fan and air conditioner relay on the left side of the radiator fan. I took the pictures but I can't post them on the site. The feet of the relay are so oxidized that I can't tell. He replaced the 2 relays there and the problem was resolved. The contact improved, my air conditioner and the radiator fan also improved. Since it made a short circuit there, it affected the contact. The air conditioner was not working as the radiator fan and the air-blowing fan were connected to the same relay. In short, the word was resolved. Greetings to all ..
|
|
| 08.05.2020 20:55 | # 9 |
| unalt |
|
|
We put the contact in vain to the master, I am going to the master with your writing tomorrow
|
|
| 08.05.2020 20:55 | # 10 |
| bilo131 |
|
|
Thank you, my teacher, say hi to me, there was a Syrian friend, he made a talented friend, Ibrahim master also checked everything perfectly God bless them  Picture of relays  |
|
| 08.05.2020 20:55 | # 11 |
| unalt |
|
|
My friends problem has been solved, I renewed the ignition key terminal, the air conditioner temperature fan contact problem bit, 70 pounds piece
|
|
| 08.05.2020 20:55 | # 12 |
 sonerkyl |
|
|
I'm glad to have your problem resolved, hodja. Also thanks for the return.
|
|